A few new mods on the 91 W250 4x4
#1
Registered User
Thread Starter
A few new mods on the 91 W250 4x4
Most of the modifications I have done so far were in and around the motor, new injectors, rebuilt VE pump, full tuneup, voltage reg, heater blower motor and a few other little things.
I am finally getting around to doing a few modifications on cosmetics on my 91. I did a carpet kit with a Spillguard pad underneath. It made a HUGE difference in sound. I couldn't hear the radio before I did it. Now I can hear a pin drop!
New saddle blanket seat cover. I also put in a new stereo and speakers, CB with external speaker, new steering components drives like a dream now, no more wandering down the freeway!
In the process of fabbing up a headache rack. Also have a triple pod gauge mount that goes on the dash. I need to wire in the TACH and hook everything up.
In the near future I am swapping out the passenger fender that was damaged. I roughed out a front bumper for a winch. I have an older Knack box for the bed as a tool box.
I will update as I go along..
I am finally getting around to doing a few modifications on cosmetics on my 91. I did a carpet kit with a Spillguard pad underneath. It made a HUGE difference in sound. I couldn't hear the radio before I did it. Now I can hear a pin drop!
New saddle blanket seat cover. I also put in a new stereo and speakers, CB with external speaker, new steering components drives like a dream now, no more wandering down the freeway!
In the process of fabbing up a headache rack. Also have a triple pod gauge mount that goes on the dash. I need to wire in the TACH and hook everything up.
In the near future I am swapping out the passenger fender that was damaged. I roughed out a front bumper for a winch. I have an older Knack box for the bed as a tool box.
I will update as I go along..
The following 3 users liked this post by Morsel:
#2
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,769
Received 1,637 Likes
on
1,112 Posts
Schweet!
Thread
Thread Starter
Forum
Replies
Last Post
bansh-eman
3rd Generation Ram - Non Drivetrain - All Years
15
09-21-2009 11:11 AM
GoodoleBob
3rd Generation Ram - Non Drivetrain - All Years
4
09-27-2006 11:37 PM