Engine Temp
Thread Starter
Registered User
Joined: Jul 2007
Posts: 24
Likes: 0
From: PA
Engine Temp
Hey when U guys grinded your fuel pin or added a new one what kind of change did the bring to the engine tempeture? I do not have a pyro yet so i want to know the difference. Thanks ahead of time.
Registered User
Joined: Feb 2007
Posts: 1,540
Likes: 0
From: Pen Argyl Pennsylvania
GET A PYRO asap. I have my pin ground drastically and my pump as far as I can take it (I think 
) but I want more. With my valet off I see 1600* + very shortly after WOT. I don't hold it there very long 
. Since you already have your pump "tweaked" I would NOT do anything else until you get a pyro so you know exactly what your trucks doing. You don't want to hurt anything.
Hope that answers your question.
) but I want more. With my valet off I see 1600* + very shortly after WOT. I don't hold it there very long . Since you already have your pump "tweaked" I would NOT do anything else until you get a pyro so you know exactly what your trucks doing. You don't want to hurt anything.Hope that answers your question.
Registered User
Joined: Sep 2007
Posts: 530
Likes: 0
From: Lancaster, PA
I'd say the same. Even with my mild pump mods I have to watch the pyro more than the speedometer. By the time you see coolant temp come up it will be too late. Did you decide which injectors to go with yet?
Thread
Thread Starter
Forum
Replies
Last Post
MossyOakCTD
24 Valve Engine and Drivetrain
19
Dec 28, 2010 09:11 PM
turbox2
2nd Gen. Dodge Ram - No Drivetrain
4
Feb 6, 2006 07:44 PM