tlspeed1

Hey guys, title says it all. A deer piled in to the side of my box on the drivers side right behind the cab. Then it bounced around the rear wheel well and hit below the tail light pushing the sheet metal in and pulling the bumper back almost a foot.

Any how how i don't have full coverage, and the box is rough otherwise, so I am think of putting a flat bed on it. What I am looking for is some 1st Gen PICS with flatbeds to see what it will look like. Any help appreciated.

mikmaze

why not look for a wrecked home depot bed, from one of their flatbed rentals, nice aluminum and built well, unlike the junk home depot sells

rbrettctd

Ill see if I can get a pic scanned of my dads old ranch truck. It looked just like yours only it was the white and gray scheme.

dpuckett

There's one in the classifieds right now.

DP

LOGAN

most trailer/bed places sell the cheap steel flat beds for like 750-800 bucks.

swampthang

here is a pic of mine that is on its way out i am going back to a stock bed




JC

stwcowboy

There is a picutre of my 92 with a J&I Flatbed on it in an Introduction post from yesterday. It wouldn't let me post the same picture again. These are 900-1,000 new and made in Oklahoma.