# of dana 60 front and 70 rear
#1
Registered User
Thread Starter
# of dana 60 front and 70 rear
I am looking a shipping a pair of axles [D/60F and D70 rear] anyone know what the rough weight of these axles are complete hub to hub?
Thank you
Thank you
#3
Registered User
Thread Starter
I have pulled a few dana 60 F and I was guessing # 400ish for just the front and less for the back Dana 70. I used a engine hoist to load the last Dana 60F in the back of the truck. Once in the back I could lift one end and move it around a little but it was HEAVY.
Thanks, sooty for shipping costs I hope you are right.
Thanks, sooty for shipping costs I hope you are right.
#4
Registered User
Join Date: Nov 2005
Location: Land of milk and honey.
Posts: 1,971
Likes: 0
Received 1 Like
on
1 Post
Hey Oliver, You know I just swapped a 60/70 set. I picked em up with my tractor forks. I'll bet the front loaded with the rotors an calipers was close to 500lbs. And I'd say 400 for the rear w/ the drums. I lowered them so I just had to pick the tires up about 1" to hang them on the axle. Socked down the lug nuts and lowered and rolled em under the frame.
#5
Registered User
Thread Starter
Thanks, Timmy22
That is about what I was thinking.
That is about what I was thinking.
#7
Registered User
Thread Starter
I was starting to feel like a wussy for using a engine hoist to put a pulled Dana 60F in the back of a truck if it only weighed #200-250 with three grown men standing around it!
Thanks guys
Thanks guys
Thread
Thread Starter
Forum
Replies
Last Post
Firstgenfanatic
1st Gen. Ram - All Topics
4
09-16-2010 01:37 AM
RichN
12 Valve Engine and Drivetrain
0
08-06-2010 06:52 PM
Ramdriver15
12 Valve Engine and Drivetrain
6
10-29-2008 08:45 AM