dana 60 "big brake" upgrade
05-21-2018, 09:16 AM
#1
Registered User
Thread Starter
dana 60 "big brake" upgrade
torq motorsports has a front caliper bracket that allows the 2010 dodge 3500 2 piston caliper and 14" rotor installed on the kingpin axle, im saying this brake is HUGE. you need a bigger master cylinder with volume, im wondering if anyone has done this, and what you might have used for brake lines. one rotor weighs more than both our rotors combined, this will require turning the spindle down to allow the rotor to slip on, and different studs.
05-21-2018, 11:39 AM
#2
Registered User
torq motorsports has a front caliper bracket that allows the 2010 dodge 3500 2 piston caliper and 14" rotor installed on the kingpin axle, im saying this brake is HUGE. you need a bigger master cylinder with volume, im wondering if anyone has done this, and what you might have used for brake lines. one rotor weighs more than both our rotors combined, this will require turning the spindle down to allow the rotor to slip on, and different studs.
Thread
Thread Starter
Forum
Replies
Last Post
sheriffav8r
2nd Gen. Dodge Ram - No Drivetrain
25
07-21-2016 07:29 AM
stillsmokin
1st Gen. Ram - All Topics
3
03-10-2013 01:33 AM
PEAKSTRYDE
Suggestions, Comments and Site Questions
1
10-11-2007 04:20 PM
D.Wiggs
3rd Gen High Performance and Accessories (5.9L Only)
29
08-09-2007 06:56 PM