Does anyone know what size the bd 40hp injectors are? I believe they are a bosch nozzle. Also what kinda power can a guy make on them? Can I get to 350whp with them if I have enough air?

 

Don't know about those injectors, but why not just go to DDP3/4's, or SDX's or Scheid or whatever? 'Cos I'm thinking once you get to 350, you're going to want to go further. Better to start off buying injectors once.

 

If you want to spend some money on a good set of injectors I'd do DDP's.

 

I have a buddy that is upgrading and will sell me these for cheap (right Luke). The truck won't make 350 for awhile and probably never more cause I'm a university student and don't have the money or time to properly build the trans.

 

ddp's are expensive for what you're getting...

 

If they are anything like my Bosch +40's, they won't make 350.

 

There is only one way to be sure of what you got, you need to know how many holes and what size those holes are, + __ HP is deceptive advertising on the part of various retailers, same with Stage 1, 2 etc.

 

That's what I was looking to find out in this thread.