92 VE motor swap fuel line and routing
#1
Registered User
Thread Starter
Join Date: Mar 2019
Location: Patriot IN
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
92 VE motor swap fuel line and routing
I have a 92 VE engine that I am swapping in my 1970 C30. I am installing all new seals in the engine, painting it and replacing whatever needs replaced.
First off I need to replace or repair my injector return line. It got pinched during shipping. Is this fixable or just replace it?
by https://www.flickr.com/photos/151715614@N08/, on Flickr
I am missing two fuel lines and the banjo bolts. Does anyone know where to buy the filter to the injection pump line or know the part number? I ordered the lift pump line. Also does anyone know what the banjo bolt part numbers are for the fuel filter in and out with the bleed screw?
First off I need to replace or repair my injector return line. It got pinched during shipping. Is this fixable or just replace it?
I am missing two fuel lines and the banjo bolts. Does anyone know where to buy the filter to the injection pump line or know the part number? I ordered the lift pump line. Also does anyone know what the banjo bolt part numbers are for the fuel filter in and out with the bleed screw?
#2
Registered User
Thread Starter
Join Date: Mar 2019
Location: Patriot IN
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I found a pic of the feed line I need, I marked it in red does anyone know the part number for this line.
by https://www.flickr.com/photos/151715614@N08/, on Flickr
Thread
Thread Starter
Forum
Replies
Last Post
loggertruck
Performance and Accessories 2nd gen only
3
11-05-2007 04:36 PM
ldperrine
Performance and Accessories 2nd gen only
2
01-07-2006 01:47 AM