28/14.50/16 Slicks fit good, and hook like crazy......
Thread Starter
Registered User
Joined: May 2005
Posts: 2,088
Likes: 0
From: Katy, TX off north Mason Road.
Well my last trip to the track was fun but I couldn't get any traction till around 4th gear. So this time out I ran some sticky tires, extended my fuel screw, and cranked the star wheel down to bring on the fuel quicker. Still no good times because the clutch would let go at the top of 3rd gear and I couldn't do much but let off of it after that. But the launches were SWEET!
Here is a quick couple of pics I thought yall would enjoy, Im going to go put the new clutch in and hopefully make it back to the Houston Raceway Park this coming friday.
Messed up the title, they are 28/14.50/16's
Here is a quick couple of pics I thought yall would enjoy, Im going to go put the new clutch in and hopefully make it back to the Houston Raceway Park this coming friday.
Messed up the title, they are 28/14.50/16's
Thread Starter
Registered User
Joined: May 2005
Posts: 2,088
Likes: 0
From: Katy, TX off north Mason Road.
First run was 1.81 60', 9.7@64 1/8th, and 17.0@54 for the 1/4. The clutch held the launch, but once I got up in 3rd gear it pretty much free reved. Second run I let it sit for about 2 hours to cool, skipped the burn out, eased off the line to a 2.3 60', but it still let go in 3rd gear. Looks like my hunt for 12's is on hold till the DD clutch is in. I knew I should have got off my butt and put it in already.
Thread
Thread Starter
Forum
Replies
Last Post
12valve
Performance and Accessories 2nd gen only
11
Jul 2, 2007 07:50 AM
2005 CTD BEAST
3rd Gen High Performance and Accessories (5.9L Only)
1
May 12, 2007 07:54 AM
chw
3rd Gen High Performance and Accessories (5.9L Only)
5
Dec 22, 2006 11:21 AM



