1989 W250 4x4 Parking Brake
#1
1989 W250 4x4 Parking Brake
HELP
I have a 1989 W250 4x4 singel wheel Diesel stick that the parking brake cable has sliped from the arm with in the rear drum. The nubbin that goes into the arm look as if it is missing a part. On one side the end of the cable has been tack welded to the arm. Spent quite abit of time serching for a exploded view of the rear brake system with in the drum with no luck.
Richard
I have a 1989 W250 4x4 singel wheel Diesel stick that the parking brake cable has sliped from the arm with in the rear drum. The nubbin that goes into the arm look as if it is missing a part. On one side the end of the cable has been tack welded to the arm. Spent quite abit of time serching for a exploded view of the rear brake system with in the drum with no luck.
Richard
#4
Registered User
Join Date: Jan 2008
Location: Quinton, New Jersey (middle of nowhere)
Posts: 7,547
Likes: 0
Received 2 Likes
on
2 Posts
Someone on here drilled the arm and used wire and twisted it real tight to hold the cable in.
Jimbo486 has nice pictures of the rear drum setup, and there's pictures in the sticky as well.
Jimbo486 has nice pictures of the rear drum setup, and there's pictures in the sticky as well.
Thread
Thread Starter
Forum
Replies
Last Post
Common
Performance and Accessories 2nd gen only
8
08-18-2006 10:08 AM