Dodge Diesel - Diesel Truck Resource Forums - Engine & Drivetrain 1st gen parts..about any OEM part

Dodge Diesel - Diesel Truck Resource Forums (https://www.dieseltruckresource.com/forums/)

- 1st Gen All Products (https://www.dieseltruckresource.com/forums/1st-gen-all-products-218/)

- - Engine & Drivetrain 1st gen parts..about any OEM part (https://www.dieseltruckresource.com/forums/1st-gen-all-products-218/1st-gen-parts-about-any-oem-part-336214/)

Hey Oliver,

Would you happen to have a rear driveshaft for a 6BT, 727, NP205 regular cab (131" WB)? If you don't, would you happen to know the length? A boy brought me his '78 and a trailer load of parts to convert the driveline, but no rear driveshaft. If I have to fab the driveshaft I'd like to have it ready before the rest of the driveline is together.

Thanks!

Bo Jones

I know I can dig up that rear driveshaft for you. I will send you a PM here shortly after I get one in my hands.

bump for the month...
Lots of 1st gen parts

Quote:

Originally Posted by oliver foster (Post 3388852)

I have a lots of hard to find 1st gens parts.

Wire harnesses of all years.
Gauge clusters
PCMs for all '91'5-93 Cummins diesels
Driveshafts - all options both 2wd or 4x4, front or rear, club cab or reg cab.
Switches and controls
Steering columns - '89-'93 many of them.
Engines - all years '89-'97
Transmissions, T-cases '89-'02
Seats, door panels, armrests, dashes, trim
Fuel tanks and sending units
Sheetmetal - even cabs and beds
Core supports '89-'93
Radiators and fan shrouds
Brackets, cross members and mounts.
Axles
Frames

You name it. Just let me know what you need.

I am in Vermont and can help you keep your old 1st gen on the road. I can ship stuff or you can pick it up.
I have had adds here over the past 15 years, with lots of replies and reviews. I just can not update my old ads as it is listed as SOLD and there is no one here that can update that. Look it up if you want to see some reviews.

How about ......
Steering column parts for 1990 W250, 5 spd manual?
Specifically the shaft bearings and thrust plate?

How about the heater control module behind the dash for a 1990 W250?
The whole assembly that has the plastic mounting arm, that breaks easily it seems,, that holds the mechanical control cable?

Hi Oliver,
I am new to forum attempted to message you, I don't know if you received msg....anyway, I am looking for PTO for Getrag 360 to power a hydraulic pump, either married or remote. I have plenty of room on driver side for married unit, passenger side is going to be crowded. Hoping you can help with a unit or information.
Thank you,
CPruitt
Pruittres@gmail.com
903-824-0505
Completing a 12V swap in a 1967 Ford F 600 my father purchased new, replacing the Braden Winch with a Palfinger crane for a personal service/farm truck.

Sent you some pictures of the Getrag PTO and pump unit I have.

Oliver, Thank you for responding to me. I look forward to trading with you.
https://cimg2.ibsrv.net/gimg/www.die...de90e8d32b.jpg
1967 Ford F-600, 12Valve, VE, Getrag swap, with Spicer 7231 Auxiliary Trans.

Cool looking project. Glad I could help out.

92 D250 automatic trans kickdown cable

Quote:

Originally Posted by oliver foster (Post 3388852)

just like the title says I’m looking for a kickdown cable if you have any for 1st gen automatic. If you text my number is (619) 981-1804 I would love to get my hands on one of these I would be happy to pay for shipping and your time to get one thanks, Dave zip is 92117

I can call you later about that cable.
I do not text, or own a cell phone.

Or you can locate me on Craigslist in Vermont or New Hampshire. I am the guy with the shop full of 12V motors in the pictures.

Happy New year!

Anyone here working on their 1st gen and struggling to find parts?
Let me know.

Another bump for the month.

Parts needs anyone?

Looking for bracket that mounts transfer case shift lever to G360 transmission.

Diesel Dawg,
I will put my hand on one today and send you a PM with details tonight.