Mark this thread as Unsold
Engine & Drivetrain 1st gen parts '89-'93…about anything.
#1
Registered User
Thread Starter
1st gen parts '89-'93…about anything.
I have a HUGE collection of Dodge diesel stuff.
Dana 60s and, 70 axles, 3.07, 3.54 and 4.10, dually and SRW. I have some 2nd gen Dana 80s as well.
I have several 12V motors, intercoolers, core supports, radiators, wiring, PCMs, interior parts, steering shafts/wheels, driveshafts, hub caps, emblems, trim, rims, plow parts, mirrors, adapter plates, starters, complete cabs, lights, T-cases, Transmissions - 727, A-518s, and Getrags mostly 4x4's.
Like I said, I have about anything other than a solid, stock dually bed for a 1st gen.
Let me know what anyone here, might need to keep an old Dodge on the road.
Dana 60s and, 70 axles, 3.07, 3.54 and 4.10, dually and SRW. I have some 2nd gen Dana 80s as well.
I have several 12V motors, intercoolers, core supports, radiators, wiring, PCMs, interior parts, steering shafts/wheels, driveshafts, hub caps, emblems, trim, rims, plow parts, mirrors, adapter plates, starters, complete cabs, lights, T-cases, Transmissions - 727, A-518s, and Getrags mostly 4x4's.
Like I said, I have about anything other than a solid, stock dually bed for a 1st gen.
Let me know what anyone here, might need to keep an old Dodge on the road.
The following 2 users liked this post by oliver foster:
Firstgenmafia (07-19-2019),
PADuallyBoy (08-02-2016)
#2
Registered User
Oliver buddy old pal. I am looking for a great condition 1989/90 dash wiring harness with no melted or burnt wires or connectors for my Town Wagon project. I could also use a good rear light/fuel gauge harness. I might have one somewhere but I know I don't have a dash. Email me (if you still have my email) directly or pm me on here. Thank you
Robert
Robert
#4
Registered User
Thread Starter
PMs sent to Robert and Greg.
Thanks,
Oliver
Thanks,
Oliver
#6
Registered User
Thread Starter
I would think shipping a pair of doors from VT to WA would be pretty expensive.
I do have nice power doors, though.
I do have nice power doors, though.
#7
Registered User
I was looking for one of those Scotty's for a couple years and could only locate one in Bama. I finally gave up, bought a 31' camper and a '05 as my wife didn't like the ride quality of the '92 W350. I swear they only made three of those cool RV's!
Trending Topics
#8
Looking for an engine harness for 1993. I have a nice under hood harness but have figured out that I need an engine harness too. Specifically looking for the connector for the fuel heater but if I got the whole engine harness I could get the pre heaters going.
This is on a retrofit into a non native truck.
Thanks,
Don
This is on a retrofit into a non native truck.
Thanks,
Don
#9
Registered User
Thread Starter
Yeah that Scotty truck camper is a cool rig, Robert!
Don, I have lots of wiring harnesses..PM sent to you.
Don, I have lots of wiring harnesses..PM sent to you.
#12
Registered User
Thread Starter
PM sent to
Vader
Vader
#14
Registered User
Thread Starter
I will check if I have that half year PCM in stock and PM you with an answer shortly.