Mark this thread as Unsold
Engine & Drivetrain 91 d350 drw hubs
#1
Registered User
Thread Starter
Join Date: Jan 2008
Location: western nebraska
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
91 d350 drw hubs
I have 2 91 drw hubs off of a dana 70.
1 spun a bearing and was professionally rebuilt at a machine shop.
These both have new bearings and seals with about 50 miles on them and were removed when the rest of my rear took a dump.
I have cleaned them and looked them over but be mindfull that they may of had some metal thru them.
Use the bearings at your discretion.
There are no wheel studs in these.
It would be better to email me at tima@vistabeam.com for contact as i don't get to this site often.
Tim
1 spun a bearing and was professionally rebuilt at a machine shop.
These both have new bearings and seals with about 50 miles on them and were removed when the rest of my rear took a dump.
I have cleaned them and looked them over but be mindfull that they may of had some metal thru them.
Use the bearings at your discretion.
There are no wheel studs in these.
It would be better to email me at tima@vistabeam.com for contact as i don't get to this site often.
Tim
Thread
Thread Starter
Forum
Replies
Last Post
91oldranchtruck
24 Valve Engine and Drivetrain
4
01-31-2011 09:45 AM