I have a 1992 dodge W250 4x4 Cummins rolling frame for sale. It is a single cab long bed single rear wheel getrag frame. The entire frame was sanded down, premiered with Eastwood rust encapsulator pro and top coated with an Eastwood 50/50 mix of satin and flat black. The first gen frames are notorious for cracking around the steering box. The front of this frame has been boxed in to strengthen it to prevent this from happening. Every hanger has been replaced with ATS hangers. The front of rear hanger is an Archive garage greasable hanger. The frame also has a full skyjacker 1.5 inch lift kit with the upgraded black max shocks. The lift kit alone was $1500. The front is a Dana 60 4500 # axle and the rear is a Dana 70 axle with 3:07 gears. Included in the sale I have a complete Yukon kingpin rebuild kit for the front axle including inner axle seals and also a gasket kit for the rear axle. Local pickup is preferred but I will work with you if you want to ship it. Buyer pays shipping cost.



Breakdown of what’s all included:

•1992 W250 Frame that has been sanded, primed, painted

• skyjacker 1.5 lift kit with new springs and black max shocks (installed) cost $1500

•Dana 60 front axle ($700)

•Dana 70 rear axle ($500)

•Yukon king pin rebuild kit with gaskets ($500)

• Archive garage front of rear hanger ($300) installed

•front of front and rear ATS hangers ($400) installed

•front frame boxing kit ($400) installed

•rear gasket kit for axle ($50).

The pictures of the frame painted black are how it sits now. I included pictures of the rebuild for reference to show it stripped. The silver picture is the Eastwood primer before topcoat was applied. Other reference photos of the frame boxed in and the archive hangers. This is a good deal for someone. Asking $2200 obo