Mark this thread as Unsold
Truck For Sale 1991 D250 unaltered
#1
1991 D250 unaltered
Have my 1st Gen up for sale. unmolested 12 valve in a 2WD truck. But is decent for year. Will need some sealing around windshield. Want to sell to pay stuff off. Company announced layoffs and I want to get ahead of the BS.
Text Ryan @ 920-277-7649
Location is Sun Prairie WI 53590.
Also have:
Dana 70 rear and Dana 60 front 3.54 ratios.
Manual conversion collection:
NV4500 (have to get beefier input shaft), transfer case, front and rear drive shafts, steering column w/ keys and door locks, lower piece of manual cross member, clutch/brake pedal assembly with complete firewall. I saved the firewall so the clutch master cylinder opening can be grafted in the old body styles.
Also have:
1987 Dodge W250 chassis with a clean D150 body on it. This one needs a lot of work. It was going to be my donor truck for the frame hole/mount positions.
Text Ryan @ 920-277-7649
Location is Sun Prairie WI 53590.
Also have:
Dana 70 rear and Dana 60 front 3.54 ratios.
Manual conversion collection:
NV4500 (have to get beefier input shaft), transfer case, front and rear drive shafts, steering column w/ keys and door locks, lower piece of manual cross member, clutch/brake pedal assembly with complete firewall. I saved the firewall so the clutch master cylinder opening can be grafted in the old body styles.
Also have:
1987 Dodge W250 chassis with a clean D150 body on it. This one needs a lot of work. It was going to be my donor truck for the frame hole/mount positions.
Thread
Thread Starter
Forum
Replies
Last Post