- - thread diameter / pitch on turbo. ?
(https://www.dieseltruckresource.com/forums/12-valve-engine-drivetrain-100/thread-diameter-pitch-turbo-318971/)
crossy
08-19-2014 12:56 PM
thread diameter / pitch on turbo. ?
anyone know off-hand what size the two outlet threads are on a stock 95 turbo as i want to get new bolts in advance -thanx, Crossy
patdaly
08-19-2014 04:43 PM
If you mean the 2 that hold the downpipe to the adapter on the turbo, they are M10X1.5 X 50 MM long flange head bolts.
crossy
08-19-2014 07:19 PM
Originally Posted by patdaly
(Post 3248508)
If you mean the 2 that hold the downpipe to the adapter on the turbo, they are M10X1.5 X 50 MM long flange head bolts.
Yep- knew those suckers would be metric- thanx
patdaly
08-20-2014 07:50 AM
Originally Posted by crossy
(Post 3248520)
Yep- knew those suckers would be metric- thanx
Yep, Metric, and just a further FYI, if you have an aftermarket exhaust, you might want to go a bit longer, say 60 MM. When I put my MBRP system on, my stock bolts were in really good shape, so I decided to try and use them. After cussing for well over an hour trying to get them started, I decided to compare them to the bolts provided, the new ones were probably 1/2" longer, put the new ones in, took all of 5 Min..........[tapdshut]
