What do you need to know?
#1
Adminstrator-ess
Thread Starter
What do you need to know?
Hey guys-
I plan to have the list of definitive threads up by the end of the week, but the list is a lot shorter than I had hoped it would be. I plan to spend some quality time with the search button, so help me out a little and tell me what kind of threads I ought to look for.
If you happen to come upon a good candidate, go ahead and post the link in the other thread.
https://www.dieseltruckresource.com/...d.php?t=100582
I plan to have the list of definitive threads up by the end of the week, but the list is a lot shorter than I had hoped it would be. I plan to spend some quality time with the search button, so help me out a little and tell me what kind of threads I ought to look for.
If you happen to come upon a good candidate, go ahead and post the link in the other thread.
https://www.dieseltruckresource.com/...d.php?t=100582
#2
Registered User
Anything kicking around on the Borgeson shaft install? I know it's a general old Dodge thing, but it'll be nice to have it tied in with everything else. I found out I have one today...never looked under the little aftermarket boot. Sadly, that means all the play in the wheel is coming from the shot drag link! Also, how about rear brakes? They can be a bear and it can get pretty involved with weird seals, bearing torque. I'll be re-doing a rear seal shortly, so if you don't find something, I'll get serious about it and snap lots of pics.
#4
Registered User
Join Date: Jan 2004
Location: Eureka,CA
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by swank
how to get 700hp by only spending $500? i wanna read that article.
anyway, glad to see you're getting this place organised, dave.
anyway, glad to see you're getting this place organised, dave.
Swank,
For $500 I will let you drive mine around the block if you want. I dont know if it will hit 700hp, but I will find out on Thursday. If its under 700hp I will still let you drive it for ummmm lets see how about $499.99
Wanna- keep up the good work.
Stomp
#5
Patron Saint of 1st gens
Join Date: Jun 2002
Location: British Columbia, Canada
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Dave, I have some text and document 'how to' files....would you like me to send them in for posting in for you current project???
Just let me know....
bob....
Just let me know....
bob....
Trending Topics
#12
Administrator
Originally Posted by wannadiesel
Hey guys-
I plan to have the list of definitive threads up by the end of the week, but the list is a lot shorter than I had hoped it would be. I plan to spend some quality time with the search button, so help me out a little and tell me what kind of threads I ought to look for.
If you happen to come upon a good candidate, go ahead and post the link in the other thread.
https://www.dieseltruckresource.com/...d.php?t=100582
I plan to have the list of definitive threads up by the end of the week, but the list is a lot shorter than I had hoped it would be. I plan to spend some quality time with the search button, so help me out a little and tell me what kind of threads I ought to look for.
If you happen to come upon a good candidate, go ahead and post the link in the other thread.
https://www.dieseltruckresource.com/...d.php?t=100582
Dave,
I have the internal breakdown on the A727 transmission and the VE injection pump if you can use them. Also in diffrent file sizes.
Jim
#14
Registered User
Join Date: Jul 2006
Location: Harrison Arkansas
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Just pulled the radiator on my 91 and the lower outside was dirty. Going to put in shop today. My question is would it be worth it to have the inlet/topmoved to the opposite side?
Thank You,
charliex25 charliex@eritter.net
Thank You,
charliex25 charliex@eritter.net