PCV Re-route..Should work on a Cummins..??
11-22-2009, 03:43 PM
#1
Registered User
Thread Starter
Join Date: Sep 2007
Location: Barrie, Ontario
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
PCV Re-route..Should work on a Cummins..??
Hey guys..
Thought this might be of interest to you all here.
I recently installed this kit purchased from SPi Performance of Oakville (who makes them), and installed it in my Duramax. Kit price was $249.00 CAD.
The Kit contained the following:
6 AN Aluminum Fittings,
A catch can made from Tig Welded 6061 Aluminum with clean out at bottom and a cleanable air filter on top.
2 braided Stainless Steel hoses
2 Tig welded Stainless Billet fittings to motor.
I consider this kit a Pro type as oppposed to what many can and have done in order to get the same result. Not knockin home made solutions..they work and $$ is scarce these days as well all know.
Anyway here it is.
It makes for a nice clean install, looks good and for the price, well worth it in my opinion....no more oil in the intercooler system..awesome.
Thanx,
stk
Thought this might be of interest to you all here.
I recently installed this kit purchased from SPi Performance of Oakville (who makes them), and installed it in my Duramax. Kit price was $249.00 CAD.
The Kit contained the following:
6 AN Aluminum Fittings,
A catch can made from Tig Welded 6061 Aluminum with clean out at bottom and a cleanable air filter on top.
2 braided Stainless Steel hoses
2 Tig welded Stainless Billet fittings to motor.
I consider this kit a Pro type as oppposed to what many can and have done in order to get the same result. Not knockin home made solutions..they work and $$ is scarce these days as well all know.
Anyway here it is.
It makes for a nice clean install, looks good and for the price, well worth it in my opinion....no more oil in the intercooler system..awesome.
Thanx,
stk
Thread
Thread Starter
Forum
Replies
Last Post
snowmanx
3rd Gen Engine and Drivetrain -> 2003-2007
6
08-18-2009 10:24 AM
