2006 Replaced turbo and will not start
#1
Registered User
Thread Starter
2006 Replaced turbo and will not start
Hi all. I swear I have searched high and low to isolate this issue but either I cant use the search very well or its not common. I replaced a blown turbo on our 2006 CR. It drove into the shop. Replaced turbo, and now It will not fire. Never opened up fuel system. Odd thing is when I turn the key on the grid heater relay clicks very rapidly and the SES light flashes just as fast. Also the security light is flashing. Im lost. Ive replaced these before and never seen this. Any advice would be appreciated.
Thanks in advance,
Contractor
Thanks in advance,
Contractor
#2
Registered User
Thread Starter
Turned out to be a bad ground at driver battery for PCM. Found a thread on this site describing my symptoms exactly but had to use google to fine it. Anyway fired right up
Thread
Thread Starter
Forum
Replies
Last Post
Sleigher
12 Valve Engine and Drivetrain
11
05-04-2017 02:12 PM
ramlovingvet
24 Valve Engine and Drivetrain
5
02-09-2011 10:14 PM
subspd
3rd Generation Ram - Non Drivetrain - All Years
35
03-29-2007 11:30 AM