4th Gen Ram -Non Drivetrain- 2010 and Up Talk about the 2010 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

Need help with speaker, amp, sub install

Thread Tools
 
Search this Thread
 
Old 09-25-2016, 05:01 PM
  #1  
Registered User
Thread Starter
 
stickk's Avatar
 
Join Date: Dec 2008
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts
Need help with speaker, amp, sub install

I would like to install some stereo components in my 2015 CCLB Tradesman. I want to keep the stock Uconnect 5.0 stereo and add 4 door speakers, a sub and an amp. For the door speakers I have used Infinity Kappa's before and been pleased with the sound so I will go with them again. The sub will be a single 10" under rear seat on pass side. The amp I am looking at is the Rockford Fosgate Prime R600X5 which is 75x4(at 2 ohms) and 200 x1 for the sub.

I've had 2 stereo systems installed in other trucks by Car Toys which worked well. On one truck I kept the factory receiver and the other I used after market. Both performed well. I just want to save the $$ on the install and I can buy the components cheaper through online vendors rather than the store front.

I am looking for some detailed instructions if anyone has any or a link to some and opinions/advice. Thank you.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
plug ugly
3rd Generation Ram - Non Drivetrain - All Years
4
12-07-2009 11:52 PM
Kiff
2nd Gen. Dodge Ram - No Drivetrain
2
12-24-2008 12:29 AM
jasonstacked06
3rd Generation Ram - Non Drivetrain - All Years
3
12-02-2007 11:47 PM
dieselrob
Other
16
06-09-2006 03:01 PM
Diesel fitter
24 Valve Engine and Drivetrain
20
01-13-2005 08:58 AM



Quick Reply: Need help with speaker, amp, sub install



All times are GMT -5. The time now is 01:53 AM.