tranny upgrade in B.C.
02-23-2016, 07:23 PM
#1
Registered User
Thread Starter
Join Date: Mar 2007
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
tranny upgrade in B.C.
I lost my Tranny last week. Now I Am looking to upgrade. BD is local for me but I am unsure which way to go. The usd is killing me right now should I bite the bullet and go south or go local.
02-24-2016, 10:08 AM
#2
Registered User
Join Date: Mar 2002
Location: Nanoose Bay B.C. Canada
Posts: 748
Likes: 0
Received 7 Likes
on
7 Posts
If your going to re and re your own trans take it to BD but mark your case to make sure you get yours back there is a lot of bad case's out there as they will not warranty a bad case.
02-25-2016, 11:31 AM
#4
Registered User
Give Rob @ Summit Performance Transmissions a call @ 604-612-1287
He used to work at BD but has been building transmissions on his own for years now. Very good guy to deal with. Honest and good pricing. Tell him Mark Wilson from Dieseltuff sent you and he'll help you out.
He used to work at BD but has been building transmissions on his own for years now. Very good guy to deal with. Honest and good pricing. Tell him Mark Wilson from Dieseltuff sent you and he'll help you out.
02-27-2016, 06:14 PM
#5
Registered User
Join Date: Apr 2006
Location: Mission, BC
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
I second Rob. He did my tranny for half the cost of BD
Plus lots of guys from washington come up here to use him. So no point going south. Gives a good warranty as well.
Plus lots of guys from washington come up here to use him. So no point going south. Gives a good warranty as well.
05-06-2016, 06:37 PM
#7
Registered User
Hey Mike. Good to hear from ya. Started my own online store & semi retired in 2012. We moved up to Green Lk in the Cariboo to get away from the rat race. lol
U still at TPS ?
U still at TPS ?
Last edited by nascar mark; 05-06-2016 at 10:35 PM.
Trending Topics
05-13-2016, 07:00 PM
#9
Registered User
Sorry to hear that. Good thing I didn’t bite over a year ago when TPS contacted me looking for me to supply 75 H&S’s. lol
See, you should have come to work for me back when I was running PDR...you would still be running the shop today with out a hickup.
See, you should have come to work for me back when I was running PDR...you would still be running the shop today with out a hickup.
Thread
Thread Starter
Forum
Replies
Last Post
NJTman
1st Gen. Ram - All Topics
17
07-04-2012 11:55 PM
Black Dog
1st Gen. Ram - All Topics
26
12-03-2009 08:18 PM
LilBigd02
3rd Gen High Performance and Accessories (5.9L Only)
7
02-28-2007 08:31 PM
boughtadodge
12 Valve Engine and Drivetrain
11
03-14-2003 05:32 PM