mybajadodgeram

As the norm I am having blend door issues and probably a very dirty condensing unit under the dash. My question is, I have read a few posts on facebook about dropping the blower motor to clean up the coil etc. rather than pulling out the entire dash. Does anyone have any insight into this, the easy way, if so could you give me a few pointers/steps on how to accomplish. Maybe even a link to a previous thread would be great, I couldn't find one. BTW this is a '96 3500


Thanks in advance

DRam11

On my '97 three screws hold the blower motor in place. Once out a shop vac was used to remove leaves and other detritus that had accumulated. No effort was made to access the condensing unit, so I can't speak to that.