wyattearp29

Going out to the sand dunes for the weekend and the truck died. It was having trouble going up a hill. It was cutting in a out and on the other side it just died. It will not start. I am getting the p01689,1688,0380,0236. I am getting fuel to the pump but when I crack the injector lines there is very little fuel. So if you have any Ideas let me know. It is the original pump with 140000. So not to bad. Let me know if you have a vender you like to use.

Sea:\>Drive

Sounds like it is time to replace the VP44.

patdaly

Yep, death codes.

To be sure, look through the VP44 troubleshooting information on blue chip diesels site.

Tallguy67

Here is the link to the best VP44 diagnostic procedures you are going to find anywhere. They are the ones from Bluechip that Pat mentions above.

http://www.bluechipdiesel.com/vp44_diagnostics.html

johnh

industrial injection in salt lake will fix you..talk to brady

wyattearp29

Thanks guys, I have contacted industrial and advanced metal products in salt lake. I have the pump out. I checked a few things as per blue chip. Now I just need to get the funds together.

wyattearp29

Well the beast is alive. Got it done today. I went through Advanced Metal Products http://www.advmp.com. Chris is really good to deal with.