Cruise light.
#2
Registered User
The yellow/red wire between PCM -49 and the clock spring will be at 12V when the cruise on-0ff switch is on. There really isn't a signal available to indicate that cruise has been set.
The following users liked this post:
George Tucker (10-23-2016)
Thread
Thread Starter
Forum
Replies
Last Post
stratos201proxl
2nd Gen. Dodge Ram - No Drivetrain
8
01-16-2014 11:04 AM
Joey-D
3rd Gen Engine and Drivetrain -> 2003-2007
4
12-12-2011 12:52 PM
csramsey640
3rd Generation Ram - Non Drivetrain - All Years
1
01-05-2011 07:37 PM
trophystock
12 Valve Engine and Drivetrain
3
07-06-2006 06:28 PM