Broken Mirror. Telescoping Tow Aftermarket
#1
Registered User
Thread Starter
Broken Mirror. Telescoping Tow Aftermarket
#2
Registered User
You can look at my build thread and see the tow mirrors I just put on mine. Just recently done, so should be only a few pages back.
#3
Registered User
Thread Starter
Thanks Trashingcows. Right now, I want to just replace what I have. These have a set screw and extend about 4 inches. I haven't been able to find them. I am definitely not going the 2nd or 3rd gen route.
#4
Those are after market mirrors. They were sold for chevy trucks. NAPA used to sell them. I did some google work and didn't find them on line anymore. Those came out in the late 70's.
#5
Registered User
Thread Starter
Yeah I haven't been able to find them either. It was cracked by the PO back in 2001 and he couldn't find any replacement then either. I will look into new glass.
#6
Registered User
Glass shop can cut you a new part. I have replaced convex mirrors with flat that way.
#7
Registered User
Yes any glass shop will cut you a new one for a few bucks
Thread
Thread Starter
Forum
Replies
Last Post
billyrae
3rd Generation Ram - Non Drivetrain - All Years
4
04-12-2005 10:31 PM