Mark this thread as Unsold
Engine & Drivetrain Reverse Rotation Steering Gear Conversion
#1
Registered User
Thread Starter
Reverse Rotation Steering Gear Conversion
I have 2 reverse rotation steering gear conversions for sale. This includes the steering cradle, steering gear, pitman arm, and drag link. Shipping will be a bit cheaper if you don't want the drag link.
The parts came from trucks that were running/driving within the last year. One truck was parted out the other was converted to cross over steering with a huge lift. I was told that both boxes work fine but that the box without the rag joint leaks (a reseal kit is included with that box). I did not personally drive the trucks or see them in operation therefore I would consider the boxes cores. I have manually rotated the input shafts on both boxes and everything seems smooth. The parts have all been stored inside. What you see in the pics is what you get please look at them carefully and ask any further questions you may have. I can send more pics if necessary.
I'm asking $250 plus shipping for each conversion set up. Figure 60 pounds from Harrisburg PA 17104 for shipping estimates. I can ship UPS or USPS. Fedex is possible but is 20 miles out of my way. Thanks and Merry Christmas, Tim.
The following users liked this post:
NJTman (12-07-2016)
Thread
Thread Starter
Forum
Replies
Last Post
MJDiesel
1st Gen. Ram - All Topics
6
08-11-2007 10:51 PM
jmccart
3rd Gen High Performance and Accessories (5.9L Only)
5
12-08-2006 12:45 AM