Shutters at start
03-09-2011, 08:32 PM
#1
Registered User
Thread Starter
Join Date: Dec 2010
Location: Washington State
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Shutters at start
I am new to Dodge. My 2011 2500 LBCC shutters a bit when I take off from a stop ( auto Trans) Is this normal for Dodge? Its not a big deal but I would like to know if I should allert the dealer.
03-09-2011, 11:01 PM
#2
Registered User
Join Date: Aug 2010
Location: Pekin, Illinois
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
My fuurd has had a shutter since day one and the dealer has spent untold days tring to fix it. I'm fixing it by buying a Ram.
I'd get the balance checked first and if thats not doing it, check U-joints for binding. A very small offset will give a very slight binding as it rotates, resulting in a vibration. Then you move to driveshaft balancing. Then if you are really, really upset - put new tires on it.
We've done all this to the fuurd and it still has a vibration.
I'd get the balance checked first and if thats not doing it, check U-joints for binding. A very small offset will give a very slight binding as it rotates, resulting in a vibration. Then you move to driveshaft balancing. Then if you are really, really upset - put new tires on it.
We've done all this to the fuurd and it still has a vibration.
Thread
Thread Starter
Forum
Replies
Last Post
OLBLUE02
24 Valve Engine and Drivetrain
2
08-27-2010 11:27 AM
rjrjrusa
4th Gen Ram -Non Drivetrain- 2010 and Up
7
08-23-2010 10:12 AM
flashgordon
1st Gen. Ram - All Topics
4
10-05-2006 04:26 PM