GSK Install question- Need Input for pacbrake kit please-
07-21-2014, 01:56 PM
#1
GSK Install question- Need Input for pacbrake kit please-
Well, I'm finally taking the time to install this 3,000 GSK kit, from pacbrake company. Have to say, its a little cloudy to understand the kit's instructions, if I need to Re-use the "Shims" behind the large outer "Original" spring. So for those of you who have installed your own, do I keep the original shims, behind the large original spring?
I have them in without the shims..but its not put together yet & I could add them..what would be the consequence if the lower two shims were not added..
1994 Ram 2500 -want the 3,000 RPM not the 4,000-
I have them in without the shims..but its not put together yet & I could add them..what would be the consequence if the lower two shims were not added..
1994 Ram 2500 -want the 3,000 RPM not the 4,000-
Thread
Thread Starter
Forum
Replies
Last Post
Hercules
Performance and Accessories 2nd gen only
6
09-25-2009 09:05 PM
scoutman
3rd Generation Ram - Non Drivetrain - All Years
9
11-11-2008 02:47 PM
97dodge12v
Performance and Accessories 2nd gen only
2
06-05-2008 07:16 AM
cjones42
3rd Gen High Performance and Accessories (5.9L Only)
0
07-27-2006 11:07 AM
wcialrlter
Performance and Accessories 2nd gen only
2
04-26-2006 10:47 PM
