Dually spacers
03-13-2012, 09:25 PM
#1
Registered User
Thread Starter
Dually spacers
You guys think will I need spacers on the rear to run Nitto Trail grapplers in 285/75R17's on the factory rims,,, Nitto's website they claim 11.57 tread width,,, was thinking 2" spacers from Fred Goeskes shop in california Wheeladapter.com
03-25-2012, 11:02 PM
#3
Registered User
Join Date: Jun 2011
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
I'm using a 2" for 315/70/17s with enough room to get chains on and load heaving without any rubbing. The 285 will have a masive gap between them with a 2" spacer.
I've wanted to see if a 265 will fit with a 1/2" spacer.
I've wanted to see if a 265 will fit with a 1/2" spacer.
03-26-2012, 07:32 AM
#4
Vendor - Former Vendor
I have used 1 1/2" spacers with 285's and there was still plenty room. A 2" spacer will leave a really big gap. The only downside to using a 1 1/2" spacer is you have to trim the end of your wheel studs off.
Thread
Thread Starter
Forum
Replies
Last Post
scarecrow
Performance and Accessories 2nd gen only
3
03-09-2005 09:04 PM
