i would like to see pics of the older dodges with 4in lifts on them and also older dodges with stacks

 

videohttp://s4.photobucket.com/albums/y12...acksvideo1.flv

 

This is a buddies truck that is a work in progress!!! nice stacks though..


hope it works never uploaded a pic...

 

sweet pics guys, sweet sounding also, does anyone know wher i can see pics of these old cummins with lift kits on them

 

here's mine with a 6" lift. There used to be a couple of lifted first gens on the skyjacker website, but they have changed things around recently.

 

here mine

 

did you have any issues with driveline angles with the 6in lift?

 

4in lift with 35 and 5in stacks

 

YES!!! the front driveshaft will not hold up. To even get it to turn I had to do some major grinding of the u-joints, and even with that the vibration was so bad when the hubs were locked, that I couldn't take it above 35. The rear was fine. I'd say go with the 4" lift if any at all.

 

thats wierd everyone but me has a problem with the front driveline on a 6 inch skyjacker, i've had mine almost fully flexed out hunting and never had the driveling come out of the splines or had a vibration, i guess im just a lucky one,

 

heres mine 5in" superlift with 5" tapercut stacks

 

nice truck oldcool90 that thing is beutiful

 

Now that's what babies are made of right there!
The others in this thread are pretty damned cool too but there's somethin' about blue. Nice rig bro.

 

6" lift, 40s in the first picture 35s in the second

 

oldcool90"s truck does look that good in person too. It is sweeeeeet!