3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Cp3 upgrade?

Thread Tools
 
Search this Thread
 
Old Feb 6, 2008 | 12:47 AM
  #1  
Kman9090's Avatar
Thread Starter
Registered User
 
Joined: Feb 2004
Posts: 1,244
Likes: 0
From: St. Charles missouri
Cp3 upgrade?

All right when I rebuilt my motor Don M said I had a bad tank of fuel so I took the orginal Cp3 off my truck and put on a different one. In meantime that Cp3 has been sitting around. I want to get a modified pump but can't have my truck down for that long. So I was wondering just because the Cp3 had a bad tank of fuel run through it if John or Darkside rebuilt it would it be ok to run after he did a stage 2 on it?
Reply
Old Feb 6, 2008 | 01:30 AM
  #2  
WUnderwood's Avatar
Registered User
 
Joined: Jan 2006
Posts: 1,618
Likes: 0
From: TEXAS
I think Floor it or Darkside will fix/replace anything that needs it inside the pump, so i wouldnt worry about that bad fuel that was run through it before, just my opinion
Reply
Old Feb 6, 2008 | 01:50 AM
  #3  
Kman9090's Avatar
Thread Starter
Registered User
 
Joined: Feb 2004
Posts: 1,244
Likes: 0
From: St. Charles missouri
all right thats good, anybody else have any oponions. John maybe you can chime in?
Reply
Old Feb 6, 2008 | 07:00 AM
  #4  
revolution_dsl's Avatar
Registered User
 
Joined: Oct 2007
Posts: 179
Likes: 0
From: Rossville, IN
depends on whats wrong with the pump
or i guess i should say where in the pump its wrong.
Reply
Old Feb 6, 2008 | 07:01 AM
  #5  
revolution_dsl's Avatar
Registered User
 
Joined: Oct 2007
Posts: 179
Likes: 0
From: Rossville, IN
have you had your injectors checked since the bad tank?
Reply
Old Feb 6, 2008 | 07:37 AM
  #6  
haloman's Avatar
Chapter President
 
Joined: May 2002
Posts: 3,529
Likes: 0
How bout using that one in dual setup after you get it rebuilt?
Reply
Old Feb 6, 2008 | 02:51 PM
  #7  
Kman9090's Avatar
Thread Starter
Registered User
 
Joined: Feb 2004
Posts: 1,244
Likes: 0
From: St. Charles missouri
Yeah The injectors weren't in when the cp3 was bad. The bad tank a fuel took my injectors out and my motor.
Reply
Old Feb 6, 2008 | 04:41 PM
  #8  
mopardamo's Avatar
Registered User
15 Year Member
 
Joined: Jan 2008
Posts: 294
Likes: 1
From: St. Louis
Hello,

WOW. You are too close to me. Where did you get such a bad tank of fuel?

Damon
Reply
Old Feb 6, 2008 | 04:45 PM
  #9  
Kman9090's Avatar
Thread Starter
Registered User
 
Joined: Feb 2004
Posts: 1,244
Likes: 0
From: St. Charles missouri
I can only narrow it down to two locations. One is either Mobil Off Hwy N and Z in Wentzville or Shell at the Wright City exit.
Reply
Old Feb 6, 2008 | 10:32 PM
  #10  
mopardamo's Avatar
Registered User
15 Year Member
 
Joined: Jan 2008
Posts: 294
Likes: 1
From: St. Louis
Thanks Kman9090

Were you on the pedal a bit to cause that much damage with bad fuel? What is the circumstances you believe that contributed to the failures.

Thanks again
Damon
Reply
Old Feb 7, 2008 | 03:47 AM
  #11  
Kman9090's Avatar
Thread Starter
Registered User
 
Joined: Feb 2004
Posts: 1,244
Likes: 0
From: St. Charles missouri
Yeah I was deep into the pedal when it let loose. Had no idea I had gotten a bad tank of fuel til it was to late.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
adamsmarshall
3rd Gen High Performance and Accessories (5.9L Only)
13
Oct 7, 2008 06:54 PM
Jethro6213
3rd Gen High Performance and Accessories (5.9L Only)
19
Jul 11, 2008 11:59 AM
pullin hard
3rd Gen Engine and Drivetrain -> 2003-2007
5
Mar 18, 2008 03:57 PM
BADBOWTIE
3rd Gen High Performance and Accessories (5.9L Only)
28
Jul 14, 2007 02:36 PM
megacabrule
3rd Gen High Performance and Accessories (5.9L Only)
33
May 10, 2007 01:07 PM




All times are GMT -5. The time now is 04:36 AM.