ThermoNuclear Coffee Shop
I wish I was as fine, as those who work the pipeline!
Joined: Dec 2008
Posts: 1,639
Likes: 0
From: Wyoming
I put a 16 penny nail through my right finger once. Walked over to my neighbors house with my pliers and asked him to yank on it for me to get it out. His mom walked out and yelled at me to get in the car. At the ER there was a line of inters who saw the xray on the wall outside the door and had to see it. It was kinda funny. The doc came in, I asked him what kind of tool he needed to take it out and he said they had one just for that. I was surprised to say the least. he came back in with an old pair of stanley slip joint pliers!!!!
After I stopped laughing he pulled the nail out, guess the glue had loosened up by then!!!!
To bad I did not get a picture of that one

I wish I was as fine, as those who work the pipeline!
Joined: Dec 2008
Posts: 1,639
Likes: 0
From: Wyoming
Well all, Time to pack it in. Or at lest try to. Took the calves tot he sale barn today and the moma's are just starting to realize it and are raising heck. Bellerin and running about. Gonna be a long night...
Be Good all, Hope all is or remains well
G'night Matt, Gnight Claud
Mornin Rick - I always knew you were a shocker!!!!

Be Good all, Hope all is or remains well
G'night Matt, Gnight Claud
Mornin Rick - I always knew you were a shocker!!!!


Kitchen knife is not quit as embarrassing though. Nothing quite like shootin yourself!!!
I put a 16 penny nail through my right finger once. Walked over to my neighbors house with my pliers and asked him to yank on it for me to get it out. His mom walked out and yelled at me to get in the car. At the ER there was a line of inters who saw the xray on the wall outside the door and had to see it. It was kinda funny. The doc came in, I asked him what kind of tool he needed to take it out and he said they had one just for that. I was surprised to say the least. he came back in with an old pair of stanley slip joint pliers!!!!
After I stopped laughing he pulled the nail out, guess the glue had loosened up by then!!!!
To bad I did not get a picture of that one

I put a 16 penny nail through my right finger once. Walked over to my neighbors house with my pliers and asked him to yank on it for me to get it out. His mom walked out and yelled at me to get in the car. At the ER there was a line of inters who saw the xray on the wall outside the door and had to see it. It was kinda funny. The doc came in, I asked him what kind of tool he needed to take it out and he said they had one just for that. I was surprised to say the least. he came back in with an old pair of stanley slip joint pliers!!!!
After I stopped laughing he pulled the nail out, guess the glue had loosened up by then!!!!
To bad I did not get a picture of that one



night

Morning all.
Today is Thursday, November 5th.
On this day in 1844 - In California, a grizzly bear underwent a successful cataract operation at the Zoological Garden.
1872 - In the U.S., Susan B. Anthony was fined $100 for attempting to vote in the presidential election. She never paid the fine.
1895 - George B. Selden received the first U.S. patent for an automobile. He sold the rights for $200,000 four years later.
1911 - Italy officially annexed Tripoli.
1935 - The game "Monopoly" was introduced by Parker Brothers Company.
1940 - U.S. President Roosevelt won an unprecedented third term in office.
1956 - British and French forces began landing in Egypt during the Suez Canal Crisis. A cease-fire was declared 2 days later.
Yes, it was a slow history day!
chaikwa.
Administrator ........ DTR's puttin fires out and workin on big trucks admin
Joined: May 2006
Posts: 2,013
Likes: 3
Morning DTR, sittin here raising my blood pressure with some phoophoo coffee
contemplating what time to go to work.
Ahhhhh, the joy's of working 2 jobs.
contemplating what time to go to work.
Ahhhhh, the joy's of working 2 jobs.
busy busy DTR!
wyo- ouch. I reached over an overhang from the roof to nail into a beam with a frame gun. sent it through my jacket at the underarm near the heart/lung. learned to take the time to get the ladder and re direct. safety is not an option. now I have a husband- who still reaches ........
hope you get the job you'd rather have!
Matt- same way-you culinary killer you...
got two job offers, turned one down for the new found freedom. my friends convinced me to act retired. don't ask for time off, just go! sounds good.
ramloving- cute son and all the Best to You and yours, hope no worries return soon.
old dog claude- you are a kick, computer guy. i still love to rebuild carbuerators, or tinker....getting less and less with all the electronics.
got to go to Indiana to pick up a 4 foot lift table. and another hour clearing out the basement. and Court tonight, and town legal paperwork, and....
better get to it.
heidi who is pretty happy Keep us in the loop ChrisR, we will pretend non interest just like you!
wyo- ouch. I reached over an overhang from the roof to nail into a beam with a frame gun. sent it through my jacket at the underarm near the heart/lung. learned to take the time to get the ladder and re direct. safety is not an option. now I have a husband- who still reaches ........
hope you get the job you'd rather have!
Matt- same way-you culinary killer you...

got two job offers, turned one down for the new found freedom. my friends convinced me to act retired. don't ask for time off, just go! sounds good.
ramloving- cute son and all the Best to You and yours, hope no worries return soon.
old dog claude- you are a kick, computer guy. i still love to rebuild carbuerators, or tinker....getting less and less with all the electronics.
got to go to Indiana to pick up a 4 foot lift table. and another hour clearing out the basement. and Court tonight, and town legal paperwork, and....
better get to it.

heidi who is pretty happy Keep us in the loop ChrisR, we will pretend non interest just like you!
Administrator / Severe Concussion Aficionado
Joined: Jul 2008
Posts: 5,491
Likes: 15
From: Home: Kaplan, LA - Pipelining In: Pecos, Tx
loaded soybeans....
lets see, I processed a couple engineering changes.
I had a conference call.
I went to lunch.
I goofed off for another hour
I had another conference call.
I finished the day discussing with my boss the details of the conference call.
I packed my laptop about 4:45 and headed home to get infront of traffic..
lets see, I processed a couple engineering changes.
I had a conference call.
I went to lunch.
I goofed off for another hour
I had another conference call.
I finished the day discussing with my boss the details of the conference call.
I packed my laptop about 4:45 and headed home to get infront of traffic..
Id rather load soybeans.
Mornin everyone. Not a whole lot going on today.
Proprietor of Fiver's Inn and Hospitality Center
Joined: Jul 2002
Posts: 2,506
Likes: 22
From: Sarasota, Florida
Gee, its Thursday all ready - - where did Monday go - - n Tuesday n Wed - - come to meditate - - what happened to Sunday? Oh well, onward and upward. Just got in from the lanai for leisurely breakfast with the blonde, coffee, take care of flowers, sweep a bit and enjoy the outdoors. Now get to work, Bob.
Hey, have a gudurn,
Bob
Hey, have a gudurn,
Bob
DTR's "Cooler than ice cubes 14 miles North of North Pole" member
Joined: Oct 2006
Posts: 1,797
Likes: 9
From: 14mi North of North Pole
How bout a seized up 235 excavator roller and a 100 ton press......... Turns little fingers into hamburger pretty effectively, and leads to inventing of new words not appropriate to say in front of your mother or small children.......
Almost nooner all!
Kids to the eye doc this AM and I get to see the dentist at lunch time. yipee.
It is 15* today though. Maybe this afternoon,I'll fix my parking brakes......
Almost nooner all!
Kids to the eye doc this AM and I get to see the dentist at lunch time. yipee.
It is 15* today though. Maybe this afternoon,I'll fix my parking brakes......
15 degrees. Thought of you guys up there, ofc marc-
I tried to walk around today in just a sweatshirt (it's 20 here with the wet wind) and was okay working outside. it's that truck/office/in and out that is killing me..... hubby slanted down my bucket forks for a better grab/lift. we are using the forks to cut trees off the ground, saving chain and backs. slide on and off or tip off from the 2 inch I beam I welded to the top of the bucket. nice clevis mount for chain hooks too, works great.
inside doing paperwork now, then off to work....
then home! then work..........
hot water, hot chocolate and really strong McDonald's coffee here, cause it was terrible when i ordered it this AM......
I tried to walk around today in just a sweatshirt (it's 20 here with the wet wind) and was okay working outside. it's that truck/office/in and out that is killing me..... hubby slanted down my bucket forks for a better grab/lift. we are using the forks to cut trees off the ground, saving chain and backs. slide on and off or tip off from the 2 inch I beam I welded to the top of the bucket. nice clevis mount for chain hooks too, works great.
inside doing paperwork now, then off to work....
then home! then work..........

hot water, hot chocolate and really strong McDonald's coffee here, cause it was terrible when i ordered it this AM......
ofcmarc....I'm trying to plan out a 4 wheeler ride this week end...the winter trail off tenderfoot should be passable now without to much hassel, if you have an AK topo its page 116 in the Gazetteer. All Alaskans invited...and select 48ers too...
DTR's "Cooler than ice cubes 14 miles North of North Pole" member
Joined: Oct 2006
Posts: 1,797
Likes: 9
From: 14mi North of North Pole
Sounds cool! I'll have to look at my plans for the week end though. The giant gap between the garage door and the floor is going to be problematic soon......
Warmed up a bit here too. 26* or so.
Reactor is started. Coffee should be ready soon.
DTR's Locomotive Superhero and the DTR Sweet Tea Specialist
Joined: Jul 2004
Posts: 2,883
Likes: 0
From: Valparaiso, IN
yeah yeah, mine at least gave the food an interesting flavor.
Heidi, where abouts in Indiana do you have to go?
I've had one of mine get stuck in a press before, it sucks. Worst I ever had was getting my hand caught in the brake rigging on a locomotive. Broke three fingers and had some good cuts on them from trying to get my hand out. Luck i had leather gloves on otherwise they would have probably been worse.
It wasn't a parring knife... I use a machete to cut food when I cook.
Evening DTR, did a little work for the farmer today. Had an early day so i came home and picked up the neighbors leaves that were covering my yard. Wife and I are going to dinner tonight and then to best buy. She needs a new laptop, hers took a poop this week. It kept turning itself off and on and doing a bunch of wierd things. I've been telling her to get a mac and to get away from microsoft. My next computer will be one of the macs.
How's everyone today?
busy busy DTR!
wyo- ouch. I reached over an overhang from the roof to nail into a beam with a frame gun. sent it through my jacket at the underarm near the heart/lung. learned to take the time to get the ladder and re direct. safety is not an option. now I have a husband- who still reaches ........
hope you get the job you'd rather have!
Matt- same way-you culinary killer you...
got two job offers, turned one down for the new found freedom. my friends convinced me to act retired. don't ask for time off, just go! sounds good.
ramloving- cute son and all the Best to You and yours, hope no worries return soon.
old dog claude- you are a kick, computer guy. i still love to rebuild carbuerators, or tinker....getting less and less with all the electronics.
got to go to Indiana to pick up a 4 foot lift table. and another hour clearing out the basement. and Court tonight, and town legal paperwork, and....
better get to it.
heidi who is pretty happy Keep us in the loop ChrisR, we will pretend non interest just like you!
wyo- ouch. I reached over an overhang from the roof to nail into a beam with a frame gun. sent it through my jacket at the underarm near the heart/lung. learned to take the time to get the ladder and re direct. safety is not an option. now I have a husband- who still reaches ........
hope you get the job you'd rather have!
Matt- same way-you culinary killer you...

got two job offers, turned one down for the new found freedom. my friends convinced me to act retired. don't ask for time off, just go! sounds good.
ramloving- cute son and all the Best to You and yours, hope no worries return soon.
old dog claude- you are a kick, computer guy. i still love to rebuild carbuerators, or tinker....getting less and less with all the electronics.
got to go to Indiana to pick up a 4 foot lift table. and another hour clearing out the basement. and Court tonight, and town legal paperwork, and....
better get to it.

heidi who is pretty happy Keep us in the loop ChrisR, we will pretend non interest just like you!

Evening DTR, did a little work for the farmer today. Had an early day so i came home and picked up the neighbors leaves that were covering my yard. Wife and I are going to dinner tonight and then to best buy. She needs a new laptop, hers took a poop this week. It kept turning itself off and on and doing a bunch of wierd things. I've been telling her to get a mac and to get away from microsoft. My next computer will be one of the macs.
How's everyone today?


