|
Sign in using an external account
|
|
||||||||
|
|
|
 |
|
|
Thread Tools | Search this Thread | Display Modes |
08-09-2006, 03:21 PM
|
#1 | ||
|
Registered User
|
Performance chip location?
|
||
|
|
|
08-09-2006, 03:23 PM
|
#2 |
|
Registered User
|
ummm, not really a chip on these..
There is either a programmer, which plugs into the OBDII port at the bottom edge of the dash, or there is a box mounted under the hood or under the dash, and it would have to plug into the wiring harnesses under the hood, and mainly on the drivers side of the engine compartment. (AD removed site violation)
__________________
My Truck 2003 SLT W/ SPORT PACKAGE, 4x4, AUTO, 3.73, POWER 412 HP with 820 TQ (SAE correction factor). 3/17/07 Smarty #9/Banks 6 Gun on 3 1. SMARTY CR 2. Banks Six Gun (no speedloader) 3. AMSOIL air filter W/ HEAT SHIELD & K&N tube to TURBO 4. Walbo Kit (392) from Glacier Diesel ACCESSORIES 1. Pyrometer, Boost, Trans Temp gauges 2. Paint Matched Fender Flares 3. 18" Eagle Alloys (178) 4. 2" Leveling Spacers. 5. 33-13.50-18 Mickey Thompson Baja Claws |
|
|
|
|
08-09-2006, 03:50 PM
|
#3 |
|
Registered User
|
EZ location
Hope I'm on the right track here....
A fueling box (EZ, Quad?, etc.) can go just about anywhere in a 2' radius of the induction manifold (near where its plugged in). Mine sits on the fuse box next to the driver's side battery. NOT with velcro though...  You'll know it when you see it. Also, if you have gauges that's usually a sign that it's been "chipped". A lot of owners will remove the box and sell it on ebay though, especially if they are trading it in.
__________________
2011 Ram 2500 SLT 6.7 Auto Crew Short bed 4x4, airbags, leveling kit, BW hidden ball hitch, Hankook 285/70s 2005 Sandpiper Sport and various toys to haul in it |
|
|
|
|
08-09-2006, 03:50 PM
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
