Are the bushing on the lower control arms replaceable? I can't find them anywhere and the dealer is trying to sell me the entire control arm?
If so, where did you find them?

__________________
2006 RAM 2500 CTD, SILVER, 4X4, H2 WHEELS, 295/70/17 NITTOS, DUAL STACKS, QUAD CAB

I dont see them on the napa site I got them for my 2001 two weeks ago and did the front end alignmant and the truck drives great. Maybe they are the same.


Bottom Top Top
Item#: NCP2673684

Price: $13.69

Attached Thumbnails

 

__________________
2001 Sport ,Black , 4 door ,Auto,Quad Mileage Max, In the tank pump, Aux Holley red for more pressure, vp44 replaced 127,000 km. DSS Steering golden ,Tri cover, Gauges Fuel, Trans,Boost,towing mirrors Kool Vue heated.

I'm sure you could, but you might be better off buying some used control arms off someone who lifted their truck. I'm sure they would be a royal PIA to get out, and used control arms with low miles are worth nothing anyways.

__________________
2004.5 3500 Quad Cab 4x4 CTD Laramie 6 spd std
Mods: Edge Juice with Attitude
6" Tough Country Lift
35" Toyo MT's
20x9 Demoda Intimidator 2's
Bilstein shocks and dual steering stabilizer
Rock Krawler adjustable track bar

Thanks, anybody have a pair of lower control arms they want to sell?

__________________
2006 RAM 2500 CTD, SILVER, 4X4, H2 WHEELS, 295/70/17 NITTOS, DUAL STACKS, QUAD CAB

i never could find any bushings either. email carli suspension, they probably remove a bunch of stock arms to put theirs on. there are also some cheaper aftermarket arms out there that don't have rubber bushings....

__________________
2005 CTD 2500 SLT 4x4 SB, G56. Lorenz 2.25 SAW, Thuren Track Bar, Road Armor front bumper, Dynatrac hub kit, Racor 445R2 fuel filter, MM 12k winch, DSS steering gear brace, Firestone Airbags, Carli upper ball joints, ARE cap, Isspro low press fuel gauge

Up top of the page is a classified section. You can probably post a WTB want to buy ad or search. Probably a good way to pick up a good stock trackbar on the cheap as well.

__________________
-Hillbilly Deluxe

2007 2500 QC SB Laramie 5.9l 4x4. Lorenz Bilstein 5100 kit, Relentless Valvebody, Thuren Track Bar and XD wheels wrapped in 35x12.50x17 Hankook M/Ts... Muffler Fell Off, otherwise stock for now.



GIG'EM AGS!

O yea, aftermarket brand new stock length arms only run a little over $200. I have mine I would be willing to sell, but i'm in canada and shipping would be a killer. Yes i'd just posted a wanted add, i've seen people offering ALL their stock parts for like $300.

__________________
2004.5 3500 Quad Cab 4x4 CTD Laramie 6 spd std
Mods: Edge Juice with Attitude
6" Tough Country Lift
35" Toyo MT's
20x9 Demoda Intimidator 2's
Bilstein shocks and dual steering stabilizer
Rock Krawler adjustable track bar