Dshiftff

heres one I just made for my 95



on the right is one i made for the 01

__________________
95 12 valve
01 12 valve

______________ \____
¦ 6BTT••CUMMINS ¦¦ �,\____„
¦_...._...._________¦¦==¦"'"""'¦
/(©)¤(©) ¤¤¤ (©)¨(©)¨¨¨ (©)¨
°----°----°----°----°----°----°----°----™

1stGen545

heres mine I found the grill guard at a junk yard for $75 and built the bumper and added the lights and had plans for two smaller fog lights to go just out side of the driving lights. Used 8" C chanel and cut to make the tapper.







same story on the 92 W350 its off of a 00' chevy suburban. took a little tweeking but I think it fits this truck better than the one it was made for.

hope yall dont mind a 1st gen it your section.

__________________
92 350 4x4 srw over 500,000 miles POD's, full 5" home made exhaust, HX35-12cm, K&N ,pump mods, SouthBend Con FE, NV4500 DennyT Power Pen, timming maxed, 3200GSK, auto meter pyro & boost, and PULL CABLE KILL. 96 2500 4x4 SLT with to many mods to list. '08 Inferno Red, Lone Star, 6.7, 68RFE auto, 4X4, QC, SB, EDGE ATTITUDE, 305-65 BFG KM II's Big Mac and cheese button, More to come.....

Dr. Evil

Those look great - nice work.

__________________
It's Dr. Evil - I didnt spend 6 frickin' years in Evil medical school to be called Mr. Evil - Thank you very m-u-c-h!


PROUD DTR Truck of the Month Winner - March 2007

THE REAL DR. EVIL

kawi600

Hoo boy I gotcha beat on that one. I rear-ended some poor guy in an acura last summer. I had a full tank and a couple bikes in the back and even with the extra following distance I nailed him hard. I was in his back seat, but the truck only had the bumper pushed back a little. No other damage.

I just installed a stock black primer bumper with black trim. It looks pretty good, but Id rather have a road armor if I had that kinda $$$$.

__________________
95 Ram 2500 199k mi, Mass Diesel DTT auto, PS62/12, 4" exhaust, AFE filter, 215 pump, TST AFC kit, #100 plate, 181 DV's, DDP2 Injectors, GS3K, 19*timing, Hamilton cam + springs, ARP studs, orings, snow water/meth, PSC power steering box, DSS, Thuren trackbar and control arms, +3" coils

Dont blame me, I supported Ron Paul

I would rather be exposed to the inconveniences attending too much liberty than those attending too small a degree of it.
Thomas Jefferson

bushwacker24

Here is my 01 bumper a buddy made for me in exchange for wiring his shop. Hope the pic worked.

Attached Thumbnails

 

__________________
Black 01 Ram 2500 4X4, BHAF, Garret stage 2 Turbo, PDI exhaust manifold, Edge Juice w Attitude, Edge 125hp injectors, BD Tranny n pan, 2" leveling kit, 33" BFG ATs on eagle 185 wheels, FASS fuel pump, BD VP44, custom built bumpers.

Tow-mater01

the day i got-er and the lastone is in wyoming yesterday

Attached Thumbnails

     

   

__________________
97 dodge 2500 ext lwb cummins 5spd 4x4 bhaf no plate Holset HE351VGT gauges, dual 6" CAT stacks 3" level 17s w/36s nitto terra grapplers
its got gauges that means its fast

2000 Cummins 24v engine wants a p7100, dv's, 3k gsk, .093 lines, .093 tubes, 75hp sticks, in front of a zf6 wrapped in a 97 ford 250-350 cc sb 4" lift on 35's

caper

__________________
02 Q-cab sport 4x4 ,H.O , 6 spd , 3.55s , rv275s,DSS, Comp,BHAF,MBRP 4 inch,cool down timer,isspro gages,285's,piaa 510s, 45K KMs IBEW lu. 424 (build it union)

97 3500 4x4 5SP 4.10s, 140K Kms


98 2500 4x4 5SP 4.10s, 190K Kms 12v QC ,LB ,loaded w/ leather untouched, and keepin it that way.

DIESELWRKS

http://www.dieseltruckresource.com/d...d.php?t=252445

this is the thread I did on my homemade bumper with pics

__________________
2002 HO 6-SPD LB 4X4 QC HTT 62/14, SB-DD3600, TST PM3/*REVO-BETA*SMARTY MACH 4'S, RINGED W/ STUDS, AFE/2 " FTE 6" STACK D/PRICOL GAUGES, FASS 150,1/2 DRAW-STRAW, DSS-BOX DT PRO-FAB TRAC BAR, CONV-T STYLE STEERING,DUNKS TRACTION BARS, AIR BAGS,17'' KMC BLACK HOSS, 37" TOYO MT'S 6" LONG ARM LIFT.THANKS RIP@sourceaumotive.

US.MARINE PROUDLY SERVED 1993-2006

nelrod

__________________
06 3500 SLT,DRW G-56, Q.Cab, Commander, Quad Race, Smarty TNT-R, HTT 62/65/13SS, GDP airhorn, Flux 1's. Formula 1 V.springs, ATS Exh. manifold, ARP Head Studs, Stage 2 Floor it CP3, GDP Walbro w/2mic F.Filter, AEM Workhorse, SouthBend 3250 dd clutch, Opie Bypass, Fluid Dampner, metal rollup tonneau cover, Headache Rack, B&W Turnover Ball, Grover Triple Air Horns, Ranchhand Bumpers, Fr. & Rr., ROCKSTARS, other goodies.

rebal

home made

__________________
1990 W250 bought new in Nov. 89 performance built 727 and torque converter , high miler 700 k heavly bombed kelderman air ride

2001 2500 HO 6spd 4x4, Engine brake , mad.ecm mach1.6s fass,SBC 4" turbo back exhaust BHAF fluid damper,ARP head studs, DSS, Fast cools.snow w/m, wife says trucks fast enough:( 335 hp/800 tq)

How many of your rights are you willing to give up before you feel totally safe ?Wake Up People vote EVERYONE OF THE BUMS OUT OF OFFICE!

Anders

here's a link to a 3rd gen bumper I put on my 95. It was pretty cheap and I think it looks better than the old one

http://www.cumminsforum.com/forum/au...en-help-3.html

murfman

Here is mine:

__________________
1999 3500 QC Auto Deep Amethyist, Glasstite shell, Sport Headlights,LEDs all around, Clear Corners,Tails,and Clearance lenses,Billit Grille, front airdam, Alpine/JL 750W Stereo,AFE, 4" Dynomax Turbo Back, Edge Comp (Not pierced yet) DD Hiflow fuel system, Pyro,Boost FP,Transtemp Gauges,BrakeSmart,RoadRelay IV
Soon: DTT, Injectors, Turbo?,Belltech 3/4 drop,Alcoas

The Killer "53" and a VP44 Yee Haa!!!
Replaced the original LP at 128,000 (No other repairs what so ever!) 146,000 and counting

rage_blue

Hey murfman what did you do with the front axil? Is it just a beefed up dana? IT looks cool.

__________________
2001 2500 5.9 with 290 000km.
Mods- AFE stage 2 intake, mbrp 4 inch cool duals. Smarty, head studs, fass 95, Auto meter ultra lite 2, feul pressure, boost, pyro. hotrod pump, southbend con fe, phat shaft 62.

DIESELWRKS

its a axle truss for strength. protection and it looks bad arse.

12valvetom

where you located and how much to make a bumper like the one on the 01

__________________
1995 2500
BD twins, Fass 150, No plate, DDP4 Injectors 191DV's, 4" Exhaust to 2 6" Miter cut Stacks, 2.5 Front lift springs, New rear springs, AFE Intake, ATS Trans Commander, ATS input shaft, Gorend triple disc,OD overide switch, 16X8 Mickey Thompson Classic 2 Rims w/35" mickey baha claws, 8' Western pro plow rhino lined

2002 3500 11ft utility
Fass DDRP, 5" straight pipe, K&N filter, hypertech, torches, 12HP air compressor, Built trans, boost, egt, trans, guages