Isspro EV Fuel Pressure Gauge?
#1
Registered User
Thread Starter
Join Date: Aug 2013
Location: Central Valley, CA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Isspro EV Fuel Pressure Gauge?
Hey guys.
Fuel pressure gauge just came in so I was gonna install it. But honestly I'm sorta confused. The two tapped inserts on the isolator only have 1 fitting that fits. So what am I supposed to do with the other side? The black plastic fitting will thread into the isolator, but I don't really know how to get it to the fuel supply? It what the plan was for some of these fittings? I'm just really confused and any help would be greatly appreciated.
The fitting circled in red doesn't go to anything? It doesn't thread in anywhere, and the tapped side is the same size as the threaded parts on the isolator. And the fitting in green is what threads into the isolator and I'm assuming is for the hose that goes to the gauge.
But then I don't know what the 1/8" OD black hose is for??
Fuel pressure gauge just came in so I was gonna install it. But honestly I'm sorta confused. The two tapped inserts on the isolator only have 1 fitting that fits. So what am I supposed to do with the other side? The black plastic fitting will thread into the isolator, but I don't really know how to get it to the fuel supply? It what the plan was for some of these fittings? I'm just really confused and any help would be greatly appreciated.
The fitting circled in red doesn't go to anything? It doesn't thread in anywhere, and the tapped side is the same size as the threaded parts on the isolator. And the fitting in green is what threads into the isolator and I'm assuming is for the hose that goes to the gauge.
But then I don't know what the 1/8" OD black hose is for??
#2
Registered User
You don't need everything in the kit honestly. It is kind of a universal kit. The only thing I see that you do not have is the tapped bleeder bolt that replaces the original. I got mine through DAP when I ordered the gauge.
To install starting from the block to the gauge.
Tapped bleeder bolt-> large fuel line-> isolator-> compression fitting-> small fuel line-> compression fitting -> gauge
Here is a good reference to follow.
http://www.genosgarage.com/installat...FPIsolater.pdf
To install starting from the block to the gauge.
Tapped bleeder bolt-> large fuel line-> isolator-> compression fitting-> small fuel line-> compression fitting -> gauge
Here is a good reference to follow.
http://www.genosgarage.com/installat...FPIsolater.pdf
#4
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
Random Acts
Performance and Accessories 2nd gen only
7
12-16-2007 02:04 AM
quadstar
3rd Gen High Performance and Accessories (5.9L Only)
4
09-27-2007 09:52 AM
66fordcrewcab
Performance and Accessories 2nd gen only
9
03-21-2007 01:47 PM
deezulsmoke
3rd Gen High Performance and Accessories (5.9L Only)
0
03-21-2005 09:59 PM