Custom Marker lights
#1
Registered User
Thread Starter
Join Date: Sep 2009
Location: Collingwood Ontario, Canada
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
Custom Marker lights
Now that I have new fenders. I am going to have to fill a couple holes in them( where the trim mounts). I was wondering what everyone has in place of the factory marker lights. Led, big small anything really Let's see!
#2
Registered User
We're putting Grand General 77650 and 77652 on the boss' kid's flatbed. I am going to put some on the front for side markers/signals. May run a few down the bottom edge of the fenders, too. On mine.
I believe they also make some that have a stud on the back for mounting, and shine straight out, that would work good for filling in holes in a fender.
I believe they also make some that have a stud on the back for mounting, and shine straight out, that would work good for filling in holes in a fender.
#3
Registered User
You can still get the original ones.
#6
Registered User
#7
Administrator
Here is how I replaced my turn signal/ marker lamps.
https://www.dieseltruckresource.com/...d.php?t=166797
Here is how I controlled them.
https://www.dieseltruckresource.com/...s-t287930.html
Jim
https://www.dieseltruckresource.com/...d.php?t=166797
Here is how I controlled them.
https://www.dieseltruckresource.com/...s-t287930.html
Jim
Trending Topics
#8
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
schamran
1st Gen. Ram - All Topics
15
02-11-2013 08:14 PM
SolidJunkMM
2nd Gen. Dodge Ram - No Drivetrain
5
10-29-2008 08:53 AM
Bob Watson
2nd Gen. Dodge Ram - No Drivetrain
12
01-26-2003 10:11 PM
BGDUMMY
2nd Gen. Dodge Ram - No Drivetrain
4
11-25-2002 05:17 PM