which plugs in first?
01-28-2008, 10:20 PM
#1
Registered User
Thread Starter
Join Date: Nov 2006
Location: Merrimack, NH
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
which plugs in first?
i have a TST and just got an EZ. The EZ go into the map sensor then the TST into the EZ right?
And on the rail side the EZ to the rail then the Quad rail gauge to the EZ?
Thanks for any help!
Chris
And on the rail side the EZ to the rail then the Quad rail gauge to the EZ?
Thanks for any help!
Chris
01-29-2008, 12:57 AM
#2
Registered User
I have mine just the opposit. MAP = TST first then EZ and then OEM. Rail pressure gauge should always plug into the sensor first to see actual sensor readings. Just my .02.
01-29-2008, 08:16 AM
#4
Registered User
Join Date: Jul 2007
Location: Weymouth, MA
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
01-29-2008, 11:02 AM
#5
Registered User
Join Date: Oct 2005
Posts: 1,067
Likes: 0
Received 0 Likes
on
0 Posts
If you have an EZ, you want the TST first. The EZ caps boost at 18-21 or so psi, so some TST programs won't fully fuel (this was the case on my '03).
If you have a MP-8, you want it plugged in first as it tells the TST the manifold has more boost than it really does, giving you better bottom-end fueling. You wouldn't run the TST rail pressure settings, though.
If you have a MP-8, you want it plugged in first as it tells the TST the manifold has more boost than it really does, giving you better bottom-end fueling. You wouldn't run the TST rail pressure settings, though.
Thread
Thread Starter
Forum
Replies
Last Post
Haulin_in_Dixie
24 Valve Engine and Drivetrain
14
01-13-2011 08:03 AM
Bradleysram
Performance and Accessories 2nd gen only
19
05-12-2009 08:36 AM
RyeThomas
3rd Gen High Performance and Accessories (5.9L Only)
34
10-13-2008 10:47 AM
TDRattler
3rd Gen High Performance and Accessories (5.9L Only)
4
08-07-2008 07:10 PM
