TURBOSPEEDER

Trying to install a fuel pressure gauge {elec} in my 04 model ,I have got a banjo bolt but it does not screw into the h p pump ,Is this the right place to take the reading from ? and also have i got the right bolt It is a russel M12 X1.25 with 1/8 NPT female port , ? is there 2 or more diffrent thread types ? or have they sent me the wrong bolt . I have not tried it in the filter housing yet , any info would be greatley recieved

jcmoyer2004

x2 on that question, i have a fuel pressure guage also i'm trying to hook up, any pictures also would be great

05CTDN8

jcmoyer2004

hey shakinredctd, so its the banjo bolt next to that electric plug right

tryNto

It's the 1 on top, pointing up, that you use...
The 1 dead center of the pic...

jcmoyer2004

ok great, now i'll be able to hook it up finally haha. thanks for all the help

TURBOSPEEDER

This is where i tried to screw my banjo bolt , but it does NOT screw in , does anyone know what the CORRECT Thread? is i have a M12 X1.25 with a 1/8 female port , this is what i was led to beleive to be the right one , so somethings wrong , Are there 2 types? or have they sent me the wrong one ?the sender was quite stiff to screw in ,any help welcome here.Thanks