Weighted Shift knobs???
#1
Registered User
Thread Starter
Weighted Shift *****???
So it's seems like the import guys are always getting weighted shift ***** to help with notchy shifting and just to help overall smoothness from a shift..
has or is anybody running a weighted shift **** on their truck??
did it make a difference???
thoughts???????
has or is anybody running a weighted shift **** on their truck??
did it make a difference???
thoughts???????
#5
Registered User
Thread Starter
I dont know if they are the same on the 2nd gens/NV's???
but I was bored so what the heck
I just got back from a test drive..it works great!!! it really cleaned up the shift..but it IS too big I am going to turn it down some more and try again.
now the reverse detent is barely noticeable
it's so big I am afraid it will bounce out of gear tho so I will turn it down some more. I feel it really makes a big difference is the smoothness and quickness of the shift
to be continued.....
#7
Registered User
Thread Starter
Did some more on my lunch break...I think I will leave it like this. I test fit it a few minutes ago(just in my drive way, no test drive) and it feels and looks way better..it's still so heavy I had to drill the bottom out, I think I will drill some more and call it good..I guess I should have snapped a installed pic too
Trending Topics
#9
Registered User
Thread Starter
#13
Registered User
Thread Starter
you check yours
I weighed the **** tonight it came in at 2.5-3.0 lbs but I am not 100% sure of the accuracy of the scale I used....I will try to find a better scale to compare.
#14
Registered User
That's fine for sled-pulling, but you might want to machine a lightweight brother out of titanium for the quarter or your ETs are gonna suffer!
#15
Registered User
Thread Starter
a titanium one would weigh the same as the stock plastic piece