Water temp. Gauge
#1
Registered User
Thread Starter
Join Date: Jan 2008
Location: Quinton, New Jersey (middle of nowhere)
Posts: 7,547
Likes: 0
Received 2 Likes
on
2 Posts
Water temp. Gauge
Anyone know the thread size on the Plug that is just past the thermostat?
I got a water temp. gauge, and it came with a 1/8 NPT sensor....and it's like half the size of the plug that is in the engine LOL....It appears to be the same thread size as the Factory In Dash water temp sensor spot that is on the back of the block on driver side.....However no parts houses list the specs on that sender.
Thanks
Brandon
I got a water temp. gauge, and it came with a 1/8 NPT sensor....and it's like half the size of the plug that is in the engine LOL....It appears to be the same thread size as the Factory In Dash water temp sensor spot that is on the back of the block on driver side.....However no parts houses list the specs on that sender.
Thanks
Brandon
#7
Registered User
Thread Starter
Join Date: Jan 2008
Location: Quinton, New Jersey (middle of nowhere)
Posts: 7,547
Likes: 0
Received 2 Likes
on
2 Posts
bill are you sure you don't mean 3/4 pipe? 3/8 Looks way too small.....
Now Trebor is saying 1/2....Lol guess I will just have to guess and check.
Now Trebor is saying 1/2....Lol guess I will just have to guess and check.
Trending Topics
#8
Registered User
Thread Starter
Join Date: Jan 2008
Location: Quinton, New Jersey (middle of nowhere)
Posts: 7,547
Likes: 0
Received 2 Likes
on
2 Posts
it's on my buddie's 90, his factory gauge doesn't work and he got the Glowshift 3 N 1 gauge like Joe's has......the only gauge in it not hooked up is the Water temp.
Now that I think about it, It would be better to put it in place of the Stock temp. sensor since thats in the water jacket, and it doesn't work anyways....
Now that I think about it, It would be better to put it in place of the Stock temp. sensor since thats in the water jacket, and it doesn't work anyways....
#10
Registered User
Join Date: Sep 2010
Location: Alberta, Canada
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
I stuck mine in behind the throttle linkage bracket. The plug is right up under the intake and you have to lie on your belly from the passenger side and look up underneath to see it. My Autotemp fit right into it.
You don't get to know my name tho' as I don't want to be the focal point of all the swearing once you try to install it there!! (not a fun time)
I only found it as I had the head off and went "Hmmmmm" where did you come from.
It's the perfect length for the wire to reach as well and looks nice and neat once installed.
Good luck.
You don't get to know my name tho' as I don't want to be the focal point of all the swearing once you try to install it there!! (not a fun time)
I only found it as I had the head off and went "Hmmmmm" where did you come from.
It's the perfect length for the wire to reach as well and looks nice and neat once installed.
Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Tuckerdee
1st Gen. Ram - All Topics
7
07-26-2006 04:26 PM