Wastegates...MBC, Turnbuckle, Aftermarket
#1
Registered User
Thread Starter
Join Date: Sep 2006
Location: Vealmoor, Texas
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Wastegates...MBC, Turnbuckle, Aftermarket
Just curious about what to do with the wastegate to supply more boost. I have heard people say to turnbuckle the wastegate. More info on this would be helpful. I have also heard that a manual boost controller would be a good way to go. Again more info welcome. Finally, going with an aftermarket wastegate like a banks. Any help is greatly appreciated. Thanks.
#2
Registered User
For the 2004 model? Is it a 555 or the 600? The 555 is a mechanical wastegate and all is needed is an adjustable boost elbow, about $20 on ebay.
The 600's are electronic.
MikeyB
The 600's are electronic.
MikeyB
#4
Registered User
Then the adjustable boost elbow will work. But you might also need a boost fooler or a performance box with boost fooling to keep the ECM from defueling and setting the overboost code.
MikeyB
MikeyB
Thread
Thread Starter
Forum
Replies
Last Post
coalburner400
Performance and Accessories 2nd gen only
4
02-27-2006 01:36 PM