3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Waste gate replacement?

Thread Tools
 
Search this Thread
 
Old 09-13-2009, 08:27 PM
  #1  
Registered User
Thread Starter
 
fordassassin's Avatar
 
Join Date: Apr 2008
Location: Fresno,CA
Posts: 215
Likes: 0
Received 0 Likes on 0 Posts
Waste gate replacement?

Well for the past 2 days, I have had this annoying rattle/ticking coming out of the middle of my exhaust. Thought I dropped a valve and was a little worried. Also, might have been injectors came to my thought since they are still the stock bodies with 100k+ on them. But every time I would rev it up, the rattle would come from the Twins.

So today, I finally took the 62/71/13 off the manifold for the 1st time. I have had slow spool up and a bad exhaust leak since I bought this turbo :bang . I did find out that the exhaust leak was in fact from the waste gate plate. So I took it apart to use some gasket sealant on it.

And I ended up finding the puck broken off. . So I would assume, this resolves the rattling/ticking from the middle of the exhaust. But now, how do I find a replacement? Also, there is a crack and a little chunk of metal missing. Nothing bad since it isn't going to the other side.

Where to find a replacement and get my truck running by Thursday? I need this thing running for the Redding event.
Thanks,


Joey
Old 09-13-2009, 08:31 PM
  #2  
Registered User
Thread Starter
 
fordassassin's Avatar
 
Join Date: Apr 2008
Location: Fresno,CA
Posts: 215
Likes: 0
Received 0 Likes on 0 Posts









Old 09-13-2009, 08:33 PM
  #3  
Registered User
Thread Starter
 
fordassassin's Avatar
 
Join Date: Apr 2008
Location: Fresno,CA
Posts: 215
Likes: 0
Received 0 Likes on 0 Posts








Old 09-13-2009, 08:40 PM
  #4  
Registered User
 
Bswope's Avatar
 
Join Date: Jan 2006
Location: McConnellsburg, PA
Posts: 1,589
Likes: 0
Received 0 Likes on 0 Posts
Dang Joey hope ya get thing going man!! That crack would have me alittle worried.... might give ED a call! But I thought HTT had a fix for that wastegate issue??
Old 09-13-2009, 08:45 PM
  #5  
Registered User
Thread Starter
 
fordassassin's Avatar
 
Join Date: Apr 2008
Location: Fresno,CA
Posts: 215
Likes: 0
Received 0 Likes on 0 Posts
I as well thought that HTT had a fix for the waste gate. Only one way to find out if I can get it in by Wednesday. I was thinking about calling Chris @ E.D and having him send me a waste gate and a thicker plate. I am worried about the crack, but not too worried. I am planning on going to the 14 housing when money allows. Since I will need a new hot pipe as well.

Make some calls Buddy and see what Llyod or anybody else says.
Thanks. Also, hows that 64 holding up?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ox
24 Valve Engine and Drivetrain
3
04-27-2003 12:26 PM
powerplant2
Performance and Accessories 2nd gen only
12
02-14-2003 04:36 PM
whiteknight
24 Valve Engine and Drivetrain
17
01-08-2003 10:38 PM
ox
24 Valve Engine and Drivetrain
1
01-08-2003 08:41 PM



Quick Reply: Waste gate replacement?



All times are GMT -5. The time now is 07:24 PM.