Dave88LX

Need to get it out of the way to get to the shroud bolts. I saw on the backside the little 'bubble' that has to be pushed in, but still feels like it's hitting somewhere. Anything I'm missing? (Nope, it's not the cap hitting either).

Getting pretty frustrated.

1320

Once you push the bubble in....it raises up a tiny bit the the edge of the tabs that slide in sometimes hit the shroud and hang up....so you need to be careful or pull your third hand out, to hold the tabs in in so they slide out while still pushing on the bubble......For some reason I can do it one handed......easy....and fight with it two handed.

infidel

There are two bubbles, one you can't see.
I usually use two long skinny screwdrivers slipped inbetween the mount and bottle, it slips right off.

Dave88LX

Exactly what it was, THANKS! I felt like a dumbass after I saw the 2nd bubble. Guess that's what learning is about eh?

kandgo

That second bubble gets everyone the first time If you are doing the front seal get ready for a bit more frustration!! Goodluck,,Rick

Dave88LX

Ahhh...must be one of them 'initiation' kind of "Welcome to Dodge" things! :lol:

basketcasejeep

Once you've taken it in and out a few times, it pops right out. I've done it dozens of times now, fitting my york brackets up....