wanting to convert to P-Pump
#1
wanting to convert to P-Pump
im wanting to convert to a p-pump this summer, i found this kit from haisley.....http://haisleymachine.com/product_in..............any one know of any where else i could find one a little cheaper?
#2
Registered User
Join Date: Oct 2005
Location: Dallas area
Posts: 2,184
Likes: 0
Received 0 Likes
on
0 Posts
When I did my conversion I bought a used 97 motor complete with 215 pump, gear housing, brakets etc... Used what I needed and sold off the rest...
Bought some of the specialty parts from haisley to save me some work. Fuel lines, crank position sensor, fuel return line and fitting, and oil line.
By the time I sold all of the parts off of my truck and what was left of the 97 motor the conversion cost me $0.00!
Bought some of the specialty parts from haisley to save me some work. Fuel lines, crank position sensor, fuel return line and fitting, and oil line.
By the time I sold all of the parts off of my truck and what was left of the 97 motor the conversion cost me $0.00!
#4
bnold, i never thought of that, ill check into that. I also checked on compd forum. I saw a post that you can use your 24V injectors you just have to change the pop off pressure....is that true thats the first time i heard that.
Thread
Thread Starter
Forum
Replies
Last Post
Mike Holmen
3rd Gen High Performance and Accessories (6.7L Only)
9
06-07-2011 09:19 PM
CCOUGHRAN1
HELP!
2
05-24-2010 09:17 AM
cLAYH
Performance and Accessories 2nd gen only
1
01-27-2007 06:36 PM