Walbro 392 regulator problems
06-24-2007, 12:56 PM
#1
Registered User
Thread Starter
Join Date: Dec 2006
Location: Indiana
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Walbro 392 regulator problems
I recently installed a walbro 392 and big line kit. I can my regulator backed down to around 15psi but then I can't lock it there so it won't leak in order to get it not to leak it has to be around 21psi. has anyone ran in to this problem?
06-24-2007, 01:55 PM
#2
Registered User
Join Date: Oct 2005
Location: LI, NY
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
I guess they changed the regulator from when I bought my unit. Mine was "non adjustable" in that there was no adjusting nut. I had to take it apart and tweak the spring and spacers to get my desired fuel pressure. Maybe you can do the same on yours?
07-22-2007, 04:30 PM
#3
Registered User
Join Date: Dec 2006
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Where did you buy your kit at? I am looking to buy the Walbro from Ebay with the install kit and the relocation kit from Geno's...but neither one mentions a regulator in the kit. Thanks
Thread
Thread Starter
Forum
Replies
Last Post
madhat
3rd Gen High Performance and Accessories (5.9L Only)
47
01-26-2008 09:06 AM
Austin'sDodge
Performance and Accessories 2nd gen only
22
07-30-2006 09:31 PM
streetsmoker
3rd Gen High Performance and Accessories (5.9L Only)
24
05-07-2006 12:26 AM
