"Wait to start" light
01-29-2007, 10:48 PM
#1
Registered User
Thread Starter
Join Date: Apr 2005
Location: Richmond Hill, Ontario
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
"Wait to start" light
Is there a specific wire in the harness that goes to the Cluster that I could tap if i Wanted to relocate my wait to start light to an Amber LED in the dash?
Or is there some other place I could tap say under the hood?
Not sure what controls the light, ECU?
Or is there some other place I could tap say under the hood?
Not sure what controls the light, ECU?
01-30-2007, 07:32 AM
#2
Registered User
Join Date: May 2006
Location: CLT, NC
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Just a thought and I am no expert, but if you want to relocate your wait to start "light" then tap that wire and route to your LED. That makes scense to me, but maybe I am wrong...Someone else should chim in with something a little more accurate if I am off base.
01-30-2007, 04:54 PM
#3
Registered User
Join Date: Aug 2005
Location: Airdrie, Alberta
Posts: 7,780
Likes: 0
Received 0 Likes
on
0 Posts
Theres an 18 ga. Orange/Black wire coming out of the ECM, which should be your wait to start signal. It goes through 3 connectors, and goes to 22ga. after the second one. Found this on page 903 (8W-40-2) of the 01 service manual.
Thread
Thread Starter
Forum
Replies
Last Post
loosendend
12 Valve Engine and Drivetrain
2
08-20-2006 08:49 PM
loosendend
12 Valve Engine and Drivetrain
1
08-20-2006 09:27 AM