24 Valve Engine and Drivetrain Discuss the 24 Valve engine and drivetrain here. No non-drivetrain discussions please. NO HIGH PERFORMANCE DISCUSSION!
View Poll Results: Which VP44 to get?
Blue Chip Special X
3
75.00%
BD Diesel standard
1
25.00%
Voters: 4. You may not vote on this poll

VP44 recommendation

Thread Tools
 
Search this Thread
 
Old 09-05-2008, 01:22 AM
  #1  
Registered User
Thread Starter
 
Cjaiceman's Avatar
 
Join Date: Sep 2003
Location: Englewood, CO
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
VP44 recommendation

Ok, so I guess I will start out with a small history of the truck, then move on. I have a 2002 Dodge Ram 2500 Diesel that has an Edge COMP, 4" open exhaust, AFE stage 2 intake, Banks highram elbow intake, wastegated stock turbo making 29lbs of boost, BD Flexplate, Banks torque converter.

The truck has about 63,900ish miles on it, and I only do about 2000-3000 a year now on it. I had a FASS 150/150 installed on the truck because I could tell the truck had a lack of fuel problem (not enough power). After getting the truck back I had it dyno'd and it ran a 353 HP w/ 4.10 gears and 33" tires.

While on the dyno it threw up a check engine light. When the codes were read it stated that the VP44 was failing, and had 249 starts on it since it had started failing. For me that would be about a year as I drive it once or twice a week. The guys estimated as little as I drive it I could get another 9-16 months out of the VP44 as its not showing problems yet.

So, my question is this, is the computer right or is it not liking the FASS putting so much pressure into the VP44? If the VP44 is going, what would you recommend I replace it with, the local Diesel performance shop said they could get a dodge spec reman for about $1100 + labor (4 hours), a BD for about $1500 + labor, but I found on here a Blue Chip VP44 for about $1930 + shipping and labor. If I do a VP44 I might as well do injectors, and if so, what would you recommend?

Sorry for the long post, but I wanted to make sure you had all the info needed to make a good recommendation.
Old 09-05-2008, 11:20 AM
  #2  
Registered User
 
johnh's Avatar
 
Join Date: Nov 2002
Location: lyman, utah
Posts: 4,053
Likes: 0
Received 28 Likes on 26 Posts
http://www.industrialinjection.com/
try here, it worked for me
Old 09-05-2008, 01:01 PM
  #3  
Registered User
 
CarBizIndio's Avatar
 
Join Date: May 2007
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Do not buy a VP44 from http://www.mwfi.com/ The pump is from Czech Republic, it wont last a year. There service is the worst and there warrenty is worthless thats why they dont show you the fine print on the warrenty.
Old 09-05-2008, 01:08 PM
  #4  
Registered User
 
nitrousn's Avatar
 
Join Date: May 2004
Location: upper michigan
Posts: 1,137
Likes: 0
Received 1 Like on 1 Post
Originally Posted by CarBizIndio
Do not buy a VP44 from http://www.mwfi.com/ The pump is from Czech Republic, it wont last a year. There service is the worst and there warrenty is worthless thats why they dont show you the fine print on the warrenty.

I have delt with them and had some warranty problems taken care of without question. I would use them again in a heartbeat. What was your issue?
Old 09-05-2008, 02:44 PM
  #5  
Registered User
 
CarBizIndio's Avatar
 
Join Date: May 2007
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
When I first ordered my VP44 they forgot to include the Oring and ect. So my daily driver truck was down for a few days. And if you want to warranty a VP44 through them you have to first send them over $1000 untill they are done testing the pump to see if the customer is responsible for the damaged pump. And if they void your warranty you can kiss that $1000 good bye on another junk pump from CZ.
Old 09-05-2008, 05:32 PM
  #6  
Registered User
 
nitrousn's Avatar
 
Join Date: May 2004
Location: upper michigan
Posts: 1,137
Likes: 0
Received 1 Like on 1 Post
Originally Posted by CarBizIndio
When I first ordered my VP44 they forgot to include the Oring and ect. So my daily driver truck was down for a few days. And if you want to warranty a VP44 through them you have to first send them over $1000 untill they are done testing the pump to see if the customer is responsible for the damaged pump. And if they void your warranty you can kiss that $1000 good bye on another junk pump from CZ.

Certain companies have a policy they follow. I had a ford pump and an injector warrantied and both time they sent parts and a UPS pick up slip for the defective ones no questions asked. With all the VP44 issues and mis diagnostics I can see why they want to be sure. Did they screw you over or did they take care of you?
Old 09-05-2008, 06:03 PM
  #7  
Registered User
 
rebal's Avatar
 
Join Date: Jan 2005
Location: Yuba city Kalifornia
Posts: 3,899
Likes: 0
Received 3 Likes on 2 Posts
blue chip diesel #1 to deal with
Old 09-05-2008, 08:28 PM
  #8  
Registered User
 
dozer12216's Avatar
 
Join Date: Dec 2007
Location: North Carolina or Kentucky. Take your pick
Posts: 2,738
Received 0 Likes on 0 Posts
Have done business with Pensacola Diesel five times now. Last price I checked was 995 for genuine Bosch reman, 113 for replacement lift pump, and 217 for aftermarket injectors. All have been perfect. JMHO
Old 09-06-2008, 06:44 PM
  #9  
Registered User
 
snow7899's Avatar
 
Join Date: Mar 2008
Location: Salem Ma
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
Blue Chip is #1 in my book as well. When you call for sales, or tech support you will usually get transfered to the owners cell phone. (if he's not in the office) and will always get right back to you if you need to leave a message after hours. I got the special X and would buy another in a heart beat. Good luck.
Old 09-09-2008, 02:04 PM
  #10  
Registered User
Thread Starter
 
Cjaiceman's Avatar
 
Join Date: Sep 2003
Location: Englewood, CO
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
After doing some more research I want to ask all the special X owners what they think of that pump, how many miles you have on it, and does your truck still pass emissions tests? I live in CO, and to fail you have to have a 35% or higher emissions particulate count. I ran an emissions test last month and got 12% w/ the Edge Comp turned off and cleaned out the engine by running it a little hard. Would a special X and slightly larger injectors make it fail emissions?
Old 09-30-2008, 02:03 PM
  #11  
Registered User
Thread Starter
 
Cjaiceman's Avatar
 
Join Date: Sep 2003
Location: Englewood, CO
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
Any special X owners out there?
Old 09-30-2008, 08:44 PM
  #12  
GSP
Registered User
 
GSP's Avatar
 
Join Date: Oct 2004
Location: Wildomar, Calif.
Posts: 697
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by CarBizIndio
Do not buy a VP44 from http://www.mwfi.com/ The pump is from Czech Republic, it wont last a year. There service is the worst and there warrenty is worthless thats why they dont show you the fine print on the warrenty.
I bought my pump from Midwest from recommendations from alot of people. They were good to deal with and no core charge also UPS return paid by them.

Dont know about this czech thing is all about. Besides CZ is known for good products. Nowere on my pump did it say czech, just germany
Old 10-01-2008, 07:44 PM
  #13  
Registered User
 
rebal's Avatar
 
Join Date: Jan 2005
Location: Yuba city Kalifornia
Posts: 3,899
Likes: 0
Received 3 Likes on 2 Posts
Originally Posted by Cjaiceman
Any special X owners out there?
Yup ...gets 2.5 mpg more then the stock pump did(old pumps electronics burned up) not my personal truck but I maintain 9 trucks for the guy next door 1 chevy 6.5 the rest are 99-06 Dodges Cummins we have installed 3 blue chips 2 are spec.X
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mopar440cu
24 Valve Engine and Drivetrain
5
11-28-2012 10:33 PM
DieselRebel24
Performance and Accessories 2nd gen only
9
12-04-2010 03:22 PM
Erska
Performance and Accessories 2nd gen only
17
03-06-2009 09:52 PM
Smokin'02
24 Valve Engine and Drivetrain
12
02-25-2007 08:39 PM
Timmay2
Performance and Accessories 2nd gen only
25
02-12-2006 01:00 AM



Quick Reply: VP44 recommendation



All times are GMT -5. The time now is 01:19 PM.