Vibration At 80 Plus Fixed
#1
Vibration At 80 Plus Fixed
I posted about a week or so ago, with a bad vibration that became noticeable at 80 mph and got progressively worse with increasing speed. The problem was a bent rear driveshaft, the runout in the middle was about
.042 in, spec is .015 or less. It is now smooth as butter up to 100, haven't had it any faster yet. Thought I would post this for you all out there that may be chasing down that annoying vibration. I got a driveline shop here in Chattanooga to make me a custom shaft with thicker walls, it is a very nice piece and I am glad I found this little glitch before my power grows. Jay
.042 in, spec is .015 or less. It is now smooth as butter up to 100, haven't had it any faster yet. Thought I would post this for you all out there that may be chasing down that annoying vibration. I got a driveline shop here in Chattanooga to make me a custom shaft with thicker walls, it is a very nice piece and I am glad I found this little glitch before my power grows. Jay
Thread
Thread Starter
Forum
Replies
Last Post
jwtuc
3rd Gen Engine and Drivetrain -> 2003-2007
14
03-22-2004 08:35 PM