valve guides
#1
Registered User
Thread Starter
Join Date: Nov 2008
Location: Sweetwater County, Wyoming
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
valve guides
Hey guys - nice to meet you. I've been on the TDR for a few years now but just joined here....looking forward to lots of great times!
I'll kick this thing off by asking about valve guides. I'm in the middle of a rebuild and am looking for a good way to remove the rubber valve guides. Got any ideas?
Thanks!
I'll kick this thing off by asking about valve guides. I'm in the middle of a rebuild and am looking for a good way to remove the rubber valve guides. Got any ideas?
Thanks!
#3
Registered User
Must be Valve Seals.
If your asking about removal with head still on block...don't know. But be sure an replace with 3rd Gen 'Viton' seals... last much longer.
RJ
If your asking about removal with head still on block...don't know. But be sure an replace with 3rd Gen 'Viton' seals... last much longer.
RJ
#4
Registered User
Thread Starter
Join Date: Nov 2008
Location: Sweetwater County, Wyoming
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Yes, the rubber valve seals is what I am talking about, and no, the head is not on the block. I have never heard of viton seals. Do they transfer right over?
Thread
Thread Starter
Forum
Replies
Last Post