Who Uses a Mag Hytec DD Trans Pan??
#1
Registered User
Thread Starter
Join Date: Sep 2007
Location: Indiana
Posts: 2,144
Likes: 0
Received 0 Likes
on
0 Posts
Who Uses a Mag Hytec DD Trans Pan??
Who out there is running a MH double deep trans pan?
727-DD should be the part number....
Any issues with the depth of the pan?
Just getting ready to order one for my trans project and wanted to make sure there was plenty of room and clearance for it....
Adds a nice 4 quarts to the system!
THANKS!
727-DD should be the part number....
Any issues with the depth of the pan?
Just getting ready to order one for my trans project and wanted to make sure there was plenty of room and clearance for it....
Adds a nice 4 quarts to the system!
THANKS!
#3
Registered User
I've been running one on mine since 15K miles. Has 125K now. No problems, very nice unit...helps keep the fluid cooler and provides 4 extra quarts of fluid. No issues with the depth.
..
..
Trending Topics
#11
Registered User
Join Date: Aug 2006
Location: Jeffersonville, Indiana
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
I know this wasn't the question but I wanted to mention, with the mag h rear dif cover my spare tire didn't fit in the under bed location. Could be partly because I upgraded the receiver hitch also. But I now have the spare in the bed tucked under the tool box. Stays cleaner there anyway. But I still love it and my DD tranny pan.
#13
Registered User
I know this wasn't the question but I wanted to mention, with the mag h rear dif cover my spare tire didn't fit in the under bed location. Could be partly because I upgraded the receiver hitch also. But I now have the spare in the bed tucked under the tool box. Stays cleaner there anyway. But I still love it and my DD tranny pan.
Hmm...I wonder why your spare won't fit with the MH rear diff. Mine fits fine.
Have you tried putting the spare on the ground...put the cradle in the hole and start lifting it........and once you have it partly lifted pull down on the rear of the tire/rim and lift up the front over the MH cover. Then finish raising it up.
..
#14
Administrator ........ DTR's puttin fires out and workin on big trucks admin
I have the tranny pan and the rear diff cover. I put both on the truck the week I took it home, I love both. You clearance issue with the diff cover is because you have a short bed truck. I have a mile of room with the lb.
#15
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
EverydayDiesel
24 Valve Engine and Drivetrain
3
11-11-2007 09:33 AM
redhornet
3rd Gen High Performance and Accessories (5.9L Only)
3
07-22-2007 09:46 PM
texasram2500
3rd Gen Engine and Drivetrain -> 2003-2007
10
05-21-2007 08:01 AM
Dodgezilla
3rd Gen High Performance and Accessories (5.9L Only)
2
05-24-2006 09:00 PM